TROUBLESHOOTING

Symptom

Possible Problem

Possible Solution

 

 

 

Unit not functioning.

No power at the unit.

Check the power plug and

 

 

fuse. (Refer to Figure 2 for

 

 

fuse location.)

 

No video source.

Check that the video source

 

 

is connected. (Refer to

 

 

Figure 1.)

 

No output device (such as

Check the connection. Check

 

a monitor).

that the monitor is turned

 

 

on. (Refer to Figure 1.)

 

 

 

No video on any output

No video source.

Check that the video source

channel.

 

is plugged in and function-

 

 

ing. (Refer to Figure 1.)

 

 

 

Programming menu not

No input from keyboard.

Check that keyboard is

turning on.

 

plugged into COM 1. (Refer

 

 

to Figure 1.)

 

No signal from keyboard.

Move joystick right.

 

Wrong signal from

Place keyboard into direct

 

keyboard.

mode. (Refer to the Entering

 

 

Program Mode section.)

 

 

Set keyboard to 4800 baud.

 

 

(Refer to the Set Port

 

 

section.)

 

 

 

No text overlay on the

Text overlay turned off for

Check menu for display

video output(s).

one or all outputs.

options for that camera.

 

 

(Refer to the Set Camera

 

 

Display section or Set

 

 

Display section, depending

 

 

on programming method.)

 

 

In addition, check unit ID

 

 

DIP switch settings. (Refer

 

 

to the Clearing Text Display

 

 

on All Channels section.)

 

Display is set off the

Check display position in

 

screen.

camera menu. (Refer to the

 

 

Set Camera Display section

 

 

or Set Display section,

 

 

depending on programming

 

 

method.)

 

 

 

MDA does not display

A character was entered

Refer to Appendix B for a

a character that was

that is not supported by

list of characters supported

sent to it.

the MDA.

by the MDA for display of

 

 

titles and message text.

 

 

 

Pelco Manual C573M-D (11/03)

41

Page 42
Image 42
Pelco cs73m-d operation manual Troubleshooting, Symptom Possible Problem Possible Solution