Pelco cs73m-d operation manual Starting the CM9760-MDA Setup Program, Login Dialog Box

STARTING THE CM9760-MDA SETUP PROGRAM

To start the CM9760-MDA Setup program, do the following:

1.In the Windows taskbar, click the Start button, point to Programs > CM9760-MDA SETUP, and then click CM9760-MDA SETUP.

The CM9760-MDA SETUP introductory screen appears followed by the Login dialog box shown in Figure 16.

Figure 16. Login Dialog Box

2.Enter the password and then click OK. The default password is 2899100. (To set a new password, refer to the Set Password section later in this manual.)

The CM9760-MDA SETUP dialog box appears as shown in Figure 17.

Figure 17. CM9760-MDA SETUP Dialog Box

For information about the CM9760-MDA SETUP dialog box, see the following section titled CM9760-MDA SETUP Dialog Box.

24 Pelco Manual C573M-D (11/03)