WASHER USE
STARTING YOUR WASHER
BEFORE STARTING THE WASHER:
Add all items and laundry products to the washer before pulling the Cycle Control knob out to achieve full water and energy savings. Opening the lid will reduce or eliminate water savings.
IMPORTANT: When washing any article of clothing, always follow fabric care labels and manufacturer’s directions.
1.Measure detergent and add to the bottom of the washer. If desired, add oxi or
2.Loosely add sorted load of clothes to wash basket. ■■ Load evenly to maintain washer balance.
■■ Mix large and small items.
■■ Use garment bags for smaller items.
Load only to the top of the basket as shown. Overloading can cause poor cleaning, poor distribution of laundry products, and an unbalanced wash load.
3.Add only liquid chlorine bleach to the dispenser. Bleach is immediately added into the washer and is diluted automatically during the wash cycle.
NOTE: Do not use this dispenser to add powdered chlorine or
■■ Using a cup with a pouring spout, measure amount of bleach. Do not allow bleach to spill, splash, drip, or run into the basket or on load. Do not use more than the recommended amount.
NOTE: Undiluted bleach will damage any fabric it touches. Damage may appear several washings later as rips, tears, holes, and color loss.
4.Add liquid fabric softener to dispenser. Fabric softener is added automatically
during the final rinse cycle. Turn the Fabric Softener knob to the Softener Added position.
■■ Measure recommended amount of liquid fabric softener. Do not allow liquid fabric softener to spill, splash, drip, or run into the basket or on load. Do not use more than the recommended amount.
■■ Always dilute liquid fabric softener by filling the dispenser with warm water until reaching the Max Fill Line arrows. Undiluted fabric softener can stain fabrics.
5.Close the washer lid. Washer will not operate with lid open.
6