Clearance requirements (Minimum)
A Both | Sides | 0.6 in. | 1.5 cm |
B | Top | 6.3 in. | 16 cm |
C | Rear* | 3.2 in. | 8 cm |
D | Front | 3.4 in. | 8.5 cm |
*Rear clearance as close to wall as venting or water connection will allow. If the washer is installed with a dryer, the greater rear clearance for the dryer venting is required for the laundry pair.
Ventilation area (Minimum) |
| ||
E | Top | 63 sq. in. | 404 sq. cm |
F | Bottom | 63 sq. in. | 404 sq. cm |
Vent spacing (actual not minimum dimensions)
G | 37 in. | 94 cm |
H | 26 in. | 66 cm |
J | 3 in. | 7.6 cm |
K | 29 in. | 73 cm |
Stand alone (shown) or Side-by-Side
| ( |
|
. | ) |
|
| & | |
|
| |
- |
| $ |
|
| |
|
| ' |
Under counter (Preferred)
$ | & |
| |
% |
|
Front of the appliance fully open.
No doors or coverings.
Minimum opening dimensions |
| |
A | 23.8 in. | 60.5 cm |
B | 23.8 in. | 60.5 cm |
C | 33.5 in. | 85 cm |
Under counter (Less Desirable)
( |
+ |
) |
* |
If front of the appliance is covered ventilation openings must be installed.
E & F are minimum area sizes |
| |
E | 63 sq.in. | 404 sq.cm |
F | 63 sq.in. | 404 sq.cm |
G & H
actual spacing dimensions for min. open area sizes
G | 3 in. | 7.6 cm |
H | 14 in. | 35.6 cm |
9