Altering an option or a running programme
It is possible to change some options before the programme carries it out. Before you make any change, you must pause the washing machine by pressing button 8.
(Only the Time Manager option cannot be modified after the programme has started. )
Changing a running programme is possible only by resetting it. Turn the programme selector dial to O and then to the new programme position. Start the new programme by pressing button 8 again. The washing water in the tub will not be emptied out.
Interrupting a programme
Press button 8 to interrupt a programme which is running, the corresponding light starts to flash. Press the button again to restart the programme.
Cancelling a programme
Turn the selector dial to O to cancel a programme which is running. You can now select a new programme.
Opening the door after the programme has started
First set the machine to pause by pressing button 8.
If the light 9 goes off, the door can be opened.
If the light 9 does not go off, this means that the machine is already heating, that the water level is too high. In this case the door can not be opened.
If you cannot open the door but you need to open it you have to switch the machine off by turning the selector dial
use electrolux 15
to O. After a few minutes the door can be opened (pay attention to the water level and temperature!).
After closing the door, it is necessary to select the programme and options again and press button 8.
At the end of the programme
The machine stops automatically, the pilot light of button 8 goes off and three blinking «0.00» will appear on the display. The buzzer sounds.
If a programme with an option that ends with water still in the tub has been selected, the pilot light 9 remains lit and the door is locked to indicate that the water must be emptied out before opening the door.
To empty out the water:
●turn the programme selector dial to
O
●select the Drain or the Spin programme
●reduce the spin speed if needed, by pressing the relevant button
●press button 8
At the end of programme, the pilot lights 9 goes off an the door can be opened.
Turn the programme selector dial to «O» to switch the machine off.
Remove the laundry from the drum and carefully check that the drum is empty.
If you do not intend to carry out another wash, close the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells.