Electrolux EWG 12450 W user manual Remove any objects from the pump impeller by rotating it

Page 24

24 electrolux care and cleaning

•Pull out the emergency emptying hose (B), place it in the container and remove its cap.

BI0002

•When no more water comes out, unscrew the pump cover (A) and remove it. Always keep a rag nearby to dry up spillage of water when removing the cover.

BI0003

BI0005

•Put the cap back on the emergency emptying hose and place the latter back in its seat.

•Screw the pump cover fully in.

BI0006

Warning!

•Remove any objects from the pump impeller by rotating it.

BI0004

When the appliance is in use and depending on the programme selected there can be hot water in the pump.

Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When replacing the cover, ensure it is securely retightened so as to stop leaks and young children being able to remove it.

Image 24

Contents Washing Machine EWG 12450 W Page Welcome to the world of Electrolux Contents Safety Information General safetyInstallation Child safety UseProduct description Detergent dispenser drawerControl panel Display Heating phase Soil level iconsChild lock Door locked lightUse First Use Daily UseProgramme Option buttons Select the Delay Start by pressing button Select the Easy Iron option by pressing buttonSelect the Extra Rinse option by pressing button Select the Start/Pause by pressing button Select the Time Manager option by pressing buttonsCancelling a programme Altering an option or a running programmeInterrupting a programme Opening the door after the programme has startedWashing hints Detergents and additives Quantity of detergent to be used Degrees of water hardnessWashing programmes White and coloured cotton heavily soiled itemsDelicate fabrics Separate spin for cottons Drain WoolCottons White Economy + Coloured cottonProgramme information Care and cleaning Cleaning the drawer recess Cleaning the pumpWashing drum Door sealRemove any objects from the pump impeller by rotating it Cleaning the water inlet filter Emergency emptying outWhat to do if Washing machineDoes not start Machine does notMachine fills then empties immediately Machine does not empty and/or does not spinThere is water on the floor Unsatisfactory washing resultsSolution Mod Technical data Programme DurationInstallation UnpackingPositioning Water inletWater-stop device Water drainageInto a drainage standpipe Onto a sink outlet spigot Special conditions Interest of the environmentElectrical connection This Appliance Must be EarthedPreparation and assembly of the door Permanent connectionBuilding-in DoorHinges Mounting the doorTop view Environment concerns Packaging materialsOld machine Ecological hintsPage Electrolux notes Page ANC number 132 964