Electrolux EWG 12450 W user manual Installation, Unpacking

Page 31

Installation

Unpacking

All transit bolts and packing must be removed before using the appliance.

You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.

1.After removing all the packaging, carefully lay machine on it’s back to remove the polystyrene base from the bottom.

HEC0008

2.Remove the power supply cable and the draining hose from the hose holders on the rear of the appliance.

HEC0001

3.With the supplied spanner unscrew and remove the central rear bolt A. Slide out the relevant plastic spacer.

installation electrolux 31

A

BI0009

4.Unscrew and remove the two large rear bolts B and the six smaller bolts C.

		C
		B
BI0010	C	B

5.Remove the bracket D and refit the six smaller bolts C.

D

BI0011

C

BI0012 C

Image 31

Contents Washing Machine EWG 12450 W Page Welcome to the world of Electrolux Contents General safety Safety InformationInstallation Use Child safetyDetergent dispenser drawer Product descriptionControl panel Display Door locked light Heating phaseSoil level icons Child lockDaily Use Use First UseProgramme Option buttons Select the Easy Iron option by pressing button Select the Delay Start by pressing buttonSelect the Extra Rinse option by pressing button Select the Time Manager option by pressing buttons Select the Start/Pause by pressing buttonOpening the door after the programme has started Cancelling a programmeAltering an option or a running programme Interrupting a programmeWashing hints Detergents and additives Degrees of water hardness Quantity of detergent to be usedWhite and coloured cotton heavily soiled items Washing programmesDelicate fabrics Separate spin for cottons Economy + Coloured cotton DrainWool Cottons WhiteProgramme information Care and cleaning Door seal Cleaning the drawer recessCleaning the pump Washing drumRemove any objects from the pump impeller by rotating it Emergency emptying out Cleaning the water inlet filterMachine does not What to do ifWashing machine Does not startUnsatisfactory washing results Machine fills then empties immediatelyMachine does not empty and/or does not spin There is water on the floorSolution Mod Programme Duration Technical dataUnpacking InstallationWater inlet PositioningWater drainage Water-stop deviceInto a drainage standpipe Onto a sink outlet spigot Interest of the environment Special conditionsThis Appliance Must be Earthed Electrical connectionDoor Preparation and assembly of the doorPermanent connection Building-inMounting the door HingesTop view Ecological hints Environment concernsPackaging materials Old machinePage Electrolux notes Page ANC number 132 964