control panel electrolux 9
Display (7)
7.47.5 7.1
2.05
7.37.2
7.1Duration of selected programme/
After selecting a programme, the duration is displayed in hours and minutes (for example 2.05). The duration is calculated automatically on the basis of the maximum recommended load for each type of fabric. After the programme has started, the time remaining is updated every minute.
/Delayed start
The selected delay set by pressing the relevant button appears on the display for a few seconds, then the duration of the previously selected programme is displayed.
/Alarm codes
In the event of operating problems, some alarm codes can be displayed, for example E20 (see chapter «What to do if...»).
/Incorrect option selection
If an option which is not compatible with the set wash programme is selected, the message Err is displayed for a few seconds and the integrated red light of button 8 starts blinking.
/End of programme
When the programme has finished three blinking zeros 0.00 are displayed, the pilot light 9 and the pilot light of button 8 go out and the door can be opened.
7.2Washing phase icons
By selecting the wash programme, the washing programme phase icons corresponding to the various phases making up the programme are shown in the bottom of the display.
After the machine has started, only the running icon stays on. When the programme has finished, the flashing zero (0.00) is displayed.