Electrolux EWG 12450 W user manual Hinges, Mounting the door

Page 38

38 electrolux installation

b) Hinges

To mount the hinges it is necessary to drill two holes (dia. 35 mm, depth

12.5-14 mm depending on the depth of door furniture) on the inner side of the door. The distance between the holes hobs fixing centres must be 416 mm.

The distance (B) from upper edge of the door to the centre of the hole depends on the adjacent furniture's dimensions.

The required dimensions are given in the picture C.

The hinges will be fixed to the door by means of screws for wood (2-Fig. B) supplied with the appliance.

c) Mounting the door

Fix the hinges (1) to the machine by means of the M5x15 screws (3-Fig. B). The hinges can be adjusted to com- pensate for possible uneven thickness of the door.

To align the door perfectly it is neces- sary to loosen the screw (3-Fig. B), adjust the door and tighten the screw again.

d) Counter-magnet (6)

The appliance is pre-arranged for a magnetic closure of the door. To enable a correct operation of this device, it is necessary to screw the counter-magnet (6) (steel disk + rubber ring) into the inner side of the door.

Its position must correspond to the magnet (4) on the appliance (see pic- ture D).

 

6

 

4

P0984

D

 

If the door has to be opened from left to right, invert the position of the plates (7), the magnet (4) and the plate (5) (Fig. B and E). Mount the counter-mag- net (6) and the hinges (1) as previously described.

 

 

 

E

4

 

 

6

 

 

 

 

5

7

1

 

 

 

 

 

 

 

 

3

P0983

 

 

2

 

 

 

Recommendations regarding the construction and fitting of a base when the installation requires an integrated appliance to be raised.

Where the appliance has been raised by mounting onto a wooden base pro- vided by the installer. The material used

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Washing Machine EWG 12450 W Page Welcome to the world of Electrolux Contents Installation Safety InformationGeneral safety Child safety UseProduct description Detergent dispenser drawerControl panel Display Child lock Heating phaseSoil level icons Door locked lightUse First Use Daily UseProgramme Option buttons Select the Extra Rinse option by pressing button Select the Delay Start by pressing buttonSelect the Easy Iron option by pressing button Select the Start/Pause by pressing button Select the Time Manager option by pressing buttonsInterrupting a programme Cancelling a programmeAltering an option or a running programme Opening the door after the programme has startedWashing hints Detergents and additives Quantity of detergent to be used Degrees of water hardnessDelicate fabrics Separate spin for cottons Washing programmesWhite and coloured cotton heavily soiled items Cottons White DrainWool Economy + Coloured cottonProgramme information Care and cleaning Washing drum Cleaning the drawer recessCleaning the pump Door sealRemove any objects from the pump impeller by rotating it Cleaning the water inlet filter Emergency emptying outDoes not start What to do ifWashing machine Machine does notThere is water on the floor Machine fills then empties immediatelyMachine does not empty and/or does not spin Unsatisfactory washing resultsSolution Mod Technical data Programme DurationInstallation UnpackingPositioning Water inletInto a drainage standpipe Water-stop deviceWater drainage Onto a sink outlet spigot Special conditions Interest of the environmentElectrical connection This Appliance Must be EarthedBuilding-in Preparation and assembly of the doorPermanent connection DoorHinges Mounting the doorTop view Old machine Environment concernsPackaging materials Ecological hintsPage Electrolux notes Page ANC number 132 964
Top Page Image Contents