AEG 14820 manual Delay Start button, START/PAUSE button, Electronic Drying button

Page 14

Description of the appliance

DELAY START button

The wash programme can be delayed from 30, 60, 90 minutes and then 1 hour by 1 hour up to a maximum of 23 hours.

The button must be pressed after selecting the programme and

before pressing the button.

The figures indicating the delay appear for about 3 seconds in the dis- play. The duration of the selected wash programme is then displayed.

After depressing the button, the machine starts its hourly count- down.

To cancel the preset delay, press the button, then press the button until the symbol 0’ is displayed.

Then press the button again to restart the programme.

The display shows the duration of the wash programme previously selected .

START/PAUSE button

This button has two functions:

a)Start

After having selected the required programme, press this button to start the machine. The corresponding pilot light stops flashing and remains

static. If you have selected the (DELAY START) option, the machine starts its hourly countdown.

b)Pause

To interrupt a programme which is running, press the button: the corresponding pilot light starts to flash.

To restart the programme from the point at which it was interrupted,

press the button again.

ELECTRONIC DRYING button

By means of this button you can choose the required degree of drying for cottons and synthetics:

- Extra dry (not for synthetics)

- Store dry

- Iron dry (not for synthetics)

The drying time is automatically adjusted by the machine: the laundry will be dried to the selected degree of dryness.

14

Image 14
Contents Lavamat Turbo Dear customer Contents Page Contents Technical data Service Positioning, connection, starting up Safety instructionsGeneral safety Follow the instructions for positioning and connectionChild safety Proper usePackaging materials DisposalTips for environmental protection MachineMain features of your washer-dryer Description of the appliance Front viewTions Control panelProgramme selector dial Cottons SyntheticsPosition = drying Programme Option buttonsPosition at 40C = Easy to iron This function cannot be used withSensitive ProgrammeElectronic Drying button Delay Start buttonSTART/PAUSE button Programme progress display Drying Time buttonDisplay Has finished, the pilot light comes onOpening the door after the programme has started Cancelling a programmeAltering an option which is running Detergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundryCotton Sort of laundry Approximate Dry weightsTypes of fabric and care labels SyntheticsDelicates 40 Detergents and additives Garments not suitable for drying Preparing the drying cycleLoad As a dryer, the machine works on the condensation principleModification of the drying time or degree of drying Drying symbols on garment labelsDuration of the drying cycle Fibre residueMax. load How to washAdditional drying Load the laundrySelection of the spin speed or option Selection of the desired wash programmeSelection of the desired options Synthetics 900 r.p.m Delicates WoolOn the display appears 0’. Press the button again Selection of the optionStarting the programme At the end of the programme Add detergent and additive Automatic washing and dryingNON-STOP programme Select the wash programmeHow to dry Drying only Max. loadProgramme chart Wash programmesConsumption Special programmesDescrip TionDrying time Spin speed Mins 1400 DryingDegree of drying 900 Consumption data for dryingMax Water Energy Duration Load After each wash Cleaning and maintenancePeriodical cleaning Exterior Detergent dispenser drawerDoor seal Drain pumpEmergency emptying out Frost precautionsWater inlet filter Something not working? TroubleshootingProblem Possible cause Solution Problem Possible cause SolutionNoisy Feet have not been Problem Possible cause E10Foam is still visible even after the last rinse Unsatisfactory washing resultsIf grey stains remain on the laundry White residue is left on the laundryThis appliance complies with the following EC directives Technical dataWater pressure 05-0,8 MPa Service Instructions for installation and electrical connection Safety instructions for the installerRear view Dimensions of the applianceFront view and side view Installation UnpackingPlug the open Holes with PositioningLevelling End of the drain hose can be positioned in three ways Water inletWater drainage Connect the machine to an earthed socket Electrical connectionPermanent connection From the Electrolux Group. The world’s No choice