AEG 14820 manual Selection of the option, Starting the programme

Page 26

How to wash

EXTRA RINSE

This appliance is designed for saving water. However, for people with a very delicate skin (allergic to detergents) it may be necessary to rinse the laundry using an extra quantity of water (extra rinse).

The extra rinse is available only with the cotton, synthetics or delicate programme.

Selection of the option

Press simultaneously buttons SPIN SPEED and for about 3 sec- onds: the light comes on in the programme progress display.

This function stays permanently on. To remove it press the same but- tons again until the light comes off.

Selection of the option

To delay starting of a programme, press the button before start- ing the machine. The figures corresponding to the selected delay will be displayed for about 3 seconds, after which the duration of the selected programme will appear on the display.

When the button is pressed, the selected delay will appear again on the display and the machine starts its countdown.

Starting the programme

1.Check that the water tap is open.

2.Press to start the programme.

If the option has been selected the programme will start at the end of the countdown.

If the light is red and flashing at the start of the programme it

indicates that the door is open. Close the door and press the button again.

If the delay start option has been selected, the machine starts its countdown, in hours, which will appear on the display. During this period it is possible to load other laundry, to modify or cancel the delay time.

Load other laundry: press the button. Open the door. Load

the laundry. Close the door and press the button again.

Cancel the delay time: press the button. Press the button until

on the display appears 0’. Press the button again.

26

Image 26
Contents Lavamat Turbo Dear customer Contents Page Contents Technical data Service Positioning, connection, starting up Safety instructionsGeneral safety Follow the instructions for positioning and connectionChild safety Proper usePackaging materials DisposalTips for environmental protection MachineMain features of your washer-dryer Description of the appliance Front viewTions Control panelProgramme selector dial Cottons SyntheticsPosition = drying Programme Option buttonsPosition at 40C = Easy to iron This function cannot be used withSensitive ProgrammeElectronic Drying button Delay Start buttonSTART/PAUSE button Programme progress display Drying Time buttonDisplay Has finished, the pilot light comes onOpening the door after the programme has started Cancelling a programmeAltering an option which is running Detergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundryCotton Sort of laundry Approximate Dry weightsTypes of fabric and care labels SyntheticsDelicates 40 Detergents and additives Garments not suitable for drying Preparing the drying cycleLoad As a dryer, the machine works on the condensation principleModification of the drying time or degree of drying Drying symbols on garment labelsDuration of the drying cycle Fibre residueMax. load How to washAdditional drying Load the laundrySelection of the spin speed or option Selection of the desired wash programmeSelection of the desired options Synthetics 900 r.p.m Delicates WoolOn the display appears 0’. Press the button again Selection of the optionStarting the programme At the end of the programme Add detergent and additive Automatic washing and dryingNON-STOP programme Select the wash programmeHow to dry Drying only Max. loadProgramme chart Wash programmesConsumption Special programmesDescrip TionDrying time Spin speed Mins 1400 DryingDegree of drying 900 Consumption data for dryingMax Water Energy Duration Load After each wash Cleaning and maintenancePeriodical cleaning Exterior Detergent dispenser drawerDoor seal Drain pumpEmergency emptying out Frost precautionsWater inlet filter Something not working? TroubleshootingProblem Possible cause Solution Problem Possible cause SolutionNoisy Feet have not been Problem Possible cause E10Foam is still visible even after the last rinse Unsatisfactory washing resultsIf grey stains remain on the laundry White residue is left on the laundryThis appliance complies with the following EC directives Technical dataWater pressure 05-0,8 MPa Service Instructions for installation and electrical connection Safety instructions for the installerRear view Dimensions of the applianceFront view and side view Installation UnpackingPlug the open Holes with PositioningLevelling End of the drain hose can be positioned in three ways Water inletWater drainage Connect the machine to an earthed socket Electrical connectionPermanent connection From the Electrolux Group. The world’s No choice