AEG 14820 manual Noisy Feet have not been

Page 39

		Something not working?


Problem	Possible cause	Solution

	The transit bolts have	Check that the machine
	not been removed.	has been unpacked as
		described in the Installation
The machine vibrates or is		section.
The machine vibrates or is
noisy	The feet have not been	Carefully level the machine.
	adjusted.
	There is little laundry in	Correct operation of the
	the drum.	machine is not affected.

	The programme is still	Wait until the end of the
	running and the drum	programme before opening
	is turning.	the door.
	The water level is above the	Before opening the door,
The door will not open	bottom edge of the door.	the water must be emptied
		out.
	The machine is heating the	Wait until the end of the
	water or drying the	heating or drying phase.
	clothes.

	The water safety system	Swithc the machine off,
The display shows the	starts working to prevent	close the inlet pipe, and
alarm code EF0	any flooding.	call the Service Force
		Centre.

Image 39

Contents Lavamat Turbo Dear customer Contents Page Contents Technical data Service Follow the instructions for positioning and connection Safety instructionsGeneral safety Positioning, connection, starting upProper use Child safetyMachine DisposalTips for environmental protection Packaging materialsMain features of your washer-dryer Front view Description of the applianceCottons Synthetics Control panelProgramme selector dial TionsThis function cannot be used with Programme Option buttonsPosition at 40C = Easy to iron Position = dryingProgramme SensitiveDelay Start button START/PAUSE buttonElectronic Drying button Has finished, the pilot light comes on Drying Time buttonDisplay Programme progress displayCancelling a programme Altering an option which is runningOpening the door after the programme has started Before the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleSynthetics Sort of laundry Approximate Dry weightsTypes of fabric and care labels CottonDelicates 40 Detergents and additives As a dryer, the machine works on the condensation principle Preparing the drying cycleLoad Garments not suitable for dryingFibre residue Drying symbols on garment labelsDuration of the drying cycle Modification of the drying time or degree of dryingLoad the laundry How to washAdditional drying Max. loadSynthetics 900 r.p.m Delicates Wool Selection of the desired wash programmeSelection of the desired options Selection of the spin speed or optionSelection of the option Starting the programmeOn the display appears 0’. Press the button again At the end of the programme Select the wash programme Automatic washing and dryingNON-STOP programme Add detergent and additiveDrying only Max. load How to dryWash programmes Programme chartTion Special programmesDescrip ConsumptionDrying Degree of dryingDrying time Spin speed Mins 1400 Consumption data for drying Max Water Energy Duration Load900 Detergent dispenser drawer Cleaning and maintenancePeriodical cleaning Exterior After each washDrain pump Door sealFrost precautions Water inlet filterEmergency emptying out Troubleshooting Problem Possible cause SolutionSomething not working? Possible cause Solution ProblemNoisy Feet have not been E10 Problem Possible causeWhite residue is left on the laundry Unsatisfactory washing resultsIf grey stains remain on the laundry Foam is still visible even after the last rinseTechnical data Water pressure 05-0,8 MPaThis appliance complies with the following EC directives Service Safety instructions for the installer Instructions for installation and electrical connectionDimensions of the appliance Front view and side viewRear view Unpacking InstallationPositioning LevellingPlug the open Holes with Water inlet Water drainageEnd of the drain hose can be positioned in three ways Electrical connection Permanent connectionConnect the machine to an earthed socket From the Electrolux Group. The world’s No choice

Problem

noisy

The feet have not been