Description of the appliance
Cancelling a programme
To cancel a programme which is running, turn the programme selector dial to the RESET/O position.
Warning! After a programme which ends with water in the drum ( 
), turn the selector dial first to O and then to the the 
, 
or 
programmes.
Altering an option which is running
To alter an option, first set the machine to PAUSE by pressing the 
button.
Any option can be modified before the machine starts it. After select-
ing the new option press the 
button again to
To modify the selected programme turn the programme selector dial to
Oand then choose a new programme.
The water is not emptied out and after pressing the 
button again the machine restarts with the newly selected programme.
Opening the door after the programme has started
To open the door set the machine to PAUSE by pressing the 
but- ton.
The 
(DOOR) light on the control panel indicates if the door can be opened:
•green light: the door can be opened;
•red light: the door cannot be opened; The door can be opened if:
•the machine is not already heating or drying;
•the water level is not above the bottom edge of the door;
•the drum is not turning.
If you need to open the door, switch the machine off by turning the selec- tor dial to position O/OFF, and wait about 3 minutes before opening the door (pay attention to the temperature and the level of the water in the tub).
16