AEG 14820 manual Door seal, Drain pump

Page 35

Cleaning and maintenance

Door seal

Check from time to time the door seal and eliminate eventual possible objects that could be trapped in the fold.

Drain pump

The pump should be inspected regularly and particularly if

the machine does not empty and/or spin

the machine makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking the pump.

Proceed as follows:

Disconnect the appliance.

If necessary wait until the water has cooled down.

Open the pump door.

Place a container close to the pump to collect any spillage.

Release the emer- gency emptying hose, place it in the container and remove its cap.

When no more water comes out, unscrew the pump and remove it. Always keep a rag nearby to dry up spillage of water when removing the pump.

Remove any objects from the pump impeller by rotating it.

Put the cap back on the emergency emptying hose

and place the lat- P1097 ter back in its

seat.

Screw the pump fully in.

Close the pump door.

35

Image 35

Contents Lavamat Turbo Dear customer Contents Page Contents Technical data Service Follow the instructions for positioning and connection Safety instructionsGeneral safety Positioning, connection, starting upProper use Child safetyMachine DisposalTips for environmental protection Packaging materialsMain features of your washer-dryer Front view Description of the applianceCottons Synthetics Control panelProgramme selector dial TionsThis function cannot be used with Programme Option buttonsPosition at 40C = Easy to iron Position = dryingProgramme SensitiveElectronic Drying button Delay Start buttonSTART/PAUSE button Has finished, the pilot light comes on Drying Time buttonDisplay Programme progress displayOpening the door after the programme has started Cancelling a programmeAltering an option which is running Before the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleSynthetics Sort of laundry Approximate Dry weightsTypes of fabric and care labels CottonDelicates 40 Detergents and additives As a dryer, the machine works on the condensation principle Preparing the drying cycleLoad Garments not suitable for dryingFibre residue Drying symbols on garment labelsDuration of the drying cycle Modification of the drying time or degree of dryingLoad the laundry How to washAdditional drying Max. loadSynthetics 900 r.p.m Delicates Wool Selection of the desired wash programmeSelection of the desired options Selection of the spin speed or optionOn the display appears 0’. Press the button again Selection of the optionStarting the programme At the end of the programme Select the wash programme Automatic washing and dryingNON-STOP programme Add detergent and additiveDrying only Max. load How to dryWash programmes Programme chartTion Special programmesDescrip ConsumptionDrying time Spin speed Mins 1400 DryingDegree of drying 900 Consumption data for dryingMax Water Energy Duration Load Detergent dispenser drawer Cleaning and maintenancePeriodical cleaning Exterior After each washDrain pump Door sealEmergency emptying out Frost precautionsWater inlet filter Something not working? TroubleshootingProblem Possible cause Solution Possible cause Solution ProblemNoisy Feet have not been E10 Problem Possible causeWhite residue is left on the laundry Unsatisfactory washing resultsIf grey stains remain on the laundry Foam is still visible even after the last rinseThis appliance complies with the following EC directives Technical dataWater pressure 05-0,8 MPa Service Safety instructions for the installer Instructions for installation and electrical connectionRear view Dimensions of the applianceFront view and side view Unpacking InstallationPlug the open Holes with PositioningLevelling End of the drain hose can be positioned in three ways Water inletWater drainage Connect the machine to an earthed socket Electrical connectionPermanent connection From the Electrolux Group. The world’s No choice