AEG 14820 manual Something not working?, Troubleshooting, Problem Possible cause Solution

Page 37

Something not working?

If during the spin cycle the machine makes an unusual whistling noise, different from the noise made by tradi- tional washing machines, this is due to a new type of motor.

If water is not visible in the drum, this is due to the modern technology of new washing machines that use less water than traditional machines.

Troubleshooting

If a problem arises, you can try to solve it yourself following the instructions below.

If you call out an engineer when one of the following problems aris- es, or to repair a fault due to incorrect use, the call-out will be charged even if requested within the guarantee period.

During machine operation the following alarm codes may be displayed:

-E10: problem with the water supply

-E20: problem with water draining

-E40: door open

At the same time the light flashes and an acoustic signal sounds.

Once the problem has been eliminated, press the button to restart the programme. If after all checks, the problem persists, contact your local AEG/ELECTROLUX Service Force Centre.

Problem			Possible cause		Solution


		The main electrical fuse			Replace the fuse.
		has blown.
		The door is not properly			Close the door; the click
		closed (E40).			of the lock should be heard.
The machine does not work		The plug is not connected.			Insert the plug.
		The	button has not		Press the button.
		been pressed.
		The	option has been		Check the selected delay on
		selected.			the display.

37

Image 37

Contents Lavamat Turbo Dear customer Contents Page Contents Technical data Service General safety Safety instructionsPositioning, connection, starting up Follow the instructions for positioning and connectionProper use Child safetyTips for environmental protection DisposalPackaging materials MachineMain features of your washer-dryer Front view Description of the applianceProgramme selector dial Control panelTions Cottons SyntheticsPosition at 40C = Easy to iron Programme Option buttonsPosition = drying This function cannot be used withProgramme SensitiveSTART/PAUSE button Delay Start buttonElectronic Drying button Display Drying Time buttonProgramme progress display Has finished, the pilot light comes onAltering an option which is running Cancelling a programmeOpening the door after the programme has started Before the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleTypes of fabric and care labels Sort of laundry Approximate Dry weightsCotton SyntheticsDelicates 40 Detergents and additives Load Preparing the drying cycleGarments not suitable for drying As a dryer, the machine works on the condensation principleDuration of the drying cycle Drying symbols on garment labelsModification of the drying time or degree of drying Fibre residueAdditional drying How to washMax. load Load the laundrySelection of the desired options Selection of the desired wash programmeSelection of the spin speed or option Synthetics 900 r.p.m Delicates WoolStarting the programme Selection of the optionOn the display appears 0’. Press the button again At the end of the programme NON-STOP programme Automatic washing and dryingAdd detergent and additive Select the wash programmeDrying only Max. load How to dryWash programmes Programme chartDescrip Special programmesConsumption TionDegree of drying DryingDrying time Spin speed Mins 1400 Max Water Energy Duration Load Consumption data for drying900 Periodical cleaning Exterior Cleaning and maintenanceAfter each wash Detergent dispenser drawerDrain pump Door sealWater inlet filter Frost precautionsEmergency emptying out Problem Possible cause Solution TroubleshootingSomething not working? Possible cause Solution ProblemNoisy Feet have not been E10 Problem Possible causeIf grey stains remain on the laundry Unsatisfactory washing resultsFoam is still visible even after the last rinse White residue is left on the laundryWater pressure 05-0,8 MPa Technical dataThis appliance complies with the following EC directives Service Safety instructions for the installer Instructions for installation and electrical connectionFront view and side view Dimensions of the applianceRear view Unpacking InstallationLevelling PositioningPlug the open Holes with Water drainage Water inletEnd of the drain hose can be positioned in three ways Permanent connection Electrical connectionConnect the machine to an earthed socket From the Electrolux Group. The world’s No choice