Maytag W10335465B installation instructions Dryer Direct Wire If connecting by direct wire

Page 14

STACKED WASHER/ELECTRIC DRYER INSTALLATION REQUIREMENTS

Dryer Direct Wire

If connecting by direct wire:

Power supply cable must match power supply (4-wire or 3-wire) and be:

nFlexible armored cable or nonmetallic sheathed copper

cable (with ground wire), covered with flexible metallic conduit. All current-carrying wires must be insulated.

n10-gauge solid copper wire (do not use aluminum).

nAt least 5 ft. (1.52 m) long.

14

Image 14

Contents Installation Instructions Stacked WASHER/DRYER Safety Stacked WASHER/DRYER Safety Stacked WASHER/DRYER Safety Parts Supplied Tools & PartsTools Needed Alternate Parts Alternate Parts and AccessoriesAccessories Clearances DIMENSIONS/CLEARANCESDimensions Stacked WASHER/GAS Dryer Installation Requirements Stacked Washer/Gas Dryer LocationStacked Washer/Gas Dryer Electrical Requirements Stacked Washer/Gas Dryer GroundingStacked Washer/Gas Dryer Gas Supply Stacked Washer/Electric Dryer Location Stacked WASHER/ELECTRIC Dryer Installation RequirementsStacked washer/electric dryer installation clearances Stacked Washer/Electric Dryer Electrical Requirements Dryer Electrical Requirements It is your responsibility Electric Dryer Power Supply CordIf using a power supply cord Electrical ConnectionDryer Direct Wire If connecting by direct wire Clamps Dryer Venting RequirementsElbows Rigid metal ventVent Hoods Vent System LengthIf an Exhaust Hood Cannot be Used Multiple Dryer VentingGas Supply Line Dryer GAS Supply RequirementsType of Gas Installing Stacked WASHER/DRYER Remove Transport SystemConnect Inlet Hoses to Water Faucets Connect Inlet HosesConnect Inlet Hoses to Washer Clear Water LinesRemove drain hose from the washer drum Route Drain HoseSecure Drain Hose Laundry tub drain or standpipe drainWall Laundry tub drain system Washer Drain SystemStandpipe drain system wall or floor FloorElectric Dryer Electrical Connections Direct Wire Strain ReliefPower Supply Cord Strain Relief Strain ReliefConnecting 4-Wire Connection Power Supply Cord Connection OptionsStandard Power Cord Connectors Connecting 3-Wire Connection Power Supply CordConnecting 4-Wire Connection Direct Wire Connecting Neutral WireConnecting 3-Wire Connection Direct Wire Connecting Remaining WiresLeveling Stacked Washer/Dryer Connecting 3-Wire Connection OptionalLeveling Complete Installation Reverse Hinge Remove the Door AssemblyReversing Dryer Door Swing Reverse the strike Replace the Door AssemblyReinstall the door Maintenance Instructions Stacked WASHER/DRYER Maintenance InstructionsCleaning the Door Seal/Bellow To clean washer interior WasherIf YOU Need Assistance DryerWasher control Electronic Control Setup InstructionsGeneral Washer/Dryer User Information Dryer controlThere are four 4 types of dryer pricing Fixed Vend Pricing Control Set-up ProceduresHow to Use the Buttons to Program the Controls Accumulator PricingExplanation Start Operating Set-upSet-Up Codes Code ExplanationOptions 3.XX 9.XX to USE if Special Pricing is Selected Special Price Start Hour Code Explanation Value of CoinCd Payment Mode COIN/DEBIT Option CE Clear Escrow OptionMULTI-LOAD Washer and Dryer Warranty