ELECTRONIC CONTROL SETUP INSTRUCTIONS
Start Operating Set-up
Washer/dryers are preset at the factory and do not require any programming. However, if you want to change the settings, follow the
The code at the beginning of each segment is the factory default setting for the PD Models and is the same for the PR Models unless noted otherwise.
The
Set-Up Codes
Explanation
REGULAR CYCLE PRICE (WASHER)
Represents the number of quarters (coin 1) to start the washer; may adjust from
PR MODELS ONLY: Factory default of 6 00, or 0 quarters.
•Press the
606REGULAR CYCLE PRICE (DRYER)
606Represents the number of quarters (coin 1) needed to start the dryer; may adjust from
600PR MODELS: Factory default of 6 00, or 0 quarters.
•Press the
WASH LENGTH (WASHER)
This is the number of minutes for WASH. Washer comes from the factory preset with 11 minutes. Choose from
•Press the
705REGULAR DRY TIME (DRYER)
705PD MODELS: Represents the number of minutes per quarter (coin 1).
Factory default of 5 minutes per coin. Example: 6 quarters x 5 minutes = 30 minutes.
By pressing the
745PR MODELS: Represents the cycle length for free
cycles. As example: “7 45” = 45 minutes.
•Press the
Code Explanation
8 00 ADDITIONAL RINSE OPTION (WASHER) This option is either NOT SELECTED “00” or
SELECTED “ar.”
8 00 Not Selected “00.”
8 Ar Selected “ar.” Cannot be combined with the Super Cycle rinse option.
•Press the
•Press the
800TYPE OF DRYER PRICING (DRYER)
800Fixed Cycle with Top Off. For detailed description, see “General Washer/Dryer User Information.”
8FC PR MODELS ONLY: Factory default of FC. Fixed Cycle. For detailed description, see “General Washer/Dryer User Information.” Use the upper- right (DELICATES) button to change this selection.
•Press the
9 00 CYCLE COUNTER OPTION
This option is either NOT SELECTED “00” or
SELECTED “0C.”
9 00 Not Selected “00.”
9 0C Selected “0C” and not able to be deselected.
•Press the
3 consecutive times to select “0C.” Once selected “0C” it cannot be deselected.
•Press the
If cycle counter (9 0C) is selected, the following is true:
1 00 | Cycles in HUNDREDS | 1 02 | = 200 |
2 00 | Cycles in ONES | 2 25 | = 25 |
|
|
| |
| TOTAL CYCLES = 225 |
This is “VIEW ONLY” and cannot be cleared.
•Press the
35