Maytag W10335465B installation instructions If YOU Need Assistance, Dryer

Page 32

STACKED WASHER/DRYER MAINTENANCE INSTRUCTIONS

Washer

Always do the following to maintain washer freshness:

nUse only HE High Efficiency detergent.

nLeave the door slightly open after each cycle to allow for better ventilation and drying of washer interior.

nClean the washer monthly using the Washer Maintenance Procedure, using 2/3 cup (160 mL) of liquid chlorine bleach.

nIf the procedure does not sufficiently improve the washer freshness, please evaluate your installation and usage conditions for other causes.

Cleaning the exterior

Use a soft damp cloth or sponge to wipe up any spills. Occasionally wipe the outside of your washer to keep it looking new. Use mild soap and water. Do not use abrasive products.

Cleaning the dispenser drawer

The dispenser drawer is removable for easy cleaning.

1.Unlock the dispenser drawer for removal by inserting a flat-blade screwdriver into the catch release. Remove the dispenser drawer.

2.Remove the inserts (the siphon from the softener and bleach compartments).

3.Wash the parts under running water.

NOTE: Do not wash components in the dishwasher.

4.Replace the inserts and return the dispenser to the drawer.

Water inlet hoses

Replace the inlet hoses after 5 years of use to reduce the risk of hose failure. Periodically inspect and replace inlet hoses if bulges, kinks, cuts, wear, or leaks are found.

When replacing your inlet hoses, record the date of replacement.

Dryer

Maintenance instructions:

Clean lint screen before and after each cycle.

Removing accumulated lint:

From inside the dryer cabinet:

Lint should be removed every 2 years or more often, depending on dryer usage. Cleaning should be done by a qualified person.

From the exhaust vent:

Lint should be removed every 2 years, or more often, depending on dryer usage.

Keep area around dryer clear and free from combustible materials, gasoline and other flammable vapors and liquids.

Keep dryer area clear and free from items that would obstruct the flow of combustion and ventilation air.

If dryer does not operate, check the following:

Electrical supply is connected.

Circuit breaker is not tripped or house fuse is not blown.

Door is closed. Listen closely to hear the door switch activate.

Cycle selection button has been pushed firmly.

For gas dryers, check that gas supply shut-off valves are set in open position.

IF YOU NEED ASSISTANCE

Contact your authorized Maytag® Commercial Laundry distributor. To locate your authorized Maytag® Commercial Laundry distributor, or for web inquiries, visit www.MaytagCommercialLaundry.com.

If you cannot locate your distributor, the Commercial Laundry Support Center will answer any questions about operating or maintaining your washer/dryer not covered in the “Installation Instructions.”

Just dial 1-800 NO BELTS (1-800-662-3587) — the call is toll free.

When you call, you will need the washer/dryer model numbers and serial numbers. Both numbers can be found on the serial-rating plate located in the dryer door well.

32

Image 32
Contents Installation Instructions Stacked WASHER/DRYER Safety Stacked WASHER/DRYER Safety Stacked WASHER/DRYER Safety Parts Supplied Tools & PartsTools Needed Alternate Parts Alternate Parts and AccessoriesAccessories Clearances DIMENSIONS/CLEARANCESDimensions Stacked WASHER/GAS Dryer Installation Requirements Stacked Washer/Gas Dryer LocationStacked Washer/Gas Dryer Electrical Requirements Stacked Washer/Gas Dryer GroundingStacked Washer/Gas Dryer Gas Supply Stacked Washer/Electric Dryer Location Stacked WASHER/ELECTRIC Dryer Installation RequirementsStacked washer/electric dryer installation clearances Stacked Washer/Electric Dryer Electrical Requirements It is your responsibility Electric Dryer Power Supply Cord If using a power supply cordDryer Electrical Requirements Electrical ConnectionDryer Direct Wire If connecting by direct wire Dryer Venting Requirements ElbowsClamps Rigid metal ventVent Hoods Vent System LengthIf an Exhaust Hood Cannot be Used Multiple Dryer VentingGas Supply Line Dryer GAS Supply RequirementsType of Gas Installing Stacked WASHER/DRYER Remove Transport SystemConnect Inlet Hoses Connect Inlet Hoses to WasherConnect Inlet Hoses to Water Faucets Clear Water LinesRoute Drain Hose Secure Drain HoseRemove drain hose from the washer drum Laundry tub drain or standpipe drainWasher Drain System Standpipe drain system wall or floorWall Laundry tub drain system FloorDirect Wire Strain Relief Power Supply Cord Strain ReliefElectric Dryer Electrical Connections Strain ReliefConnecting 4-Wire Connection Power Supply Cord Connection OptionsConnecting 3-Wire Connection Power Supply Cord Connecting 4-Wire Connection Direct WireStandard Power Cord Connectors Connecting Neutral WireConnecting 3-Wire Connection Direct Wire Connecting Remaining WiresLeveling Stacked Washer/Dryer Connecting 3-Wire Connection OptionalLeveling Complete Installation Reverse Hinge Remove the Door AssemblyReversing Dryer Door Swing Reverse the strike Replace the Door AssemblyReinstall the door Stacked WASHER/DRYER Maintenance Instructions Cleaning the Door Seal/Bellow To clean washer interiorMaintenance Instructions WasherIf YOU Need Assistance DryerElectronic Control Setup Instructions General Washer/Dryer User InformationWasher control Dryer controlControl Set-up Procedures How to Use the Buttons to Program the ControlsThere are four 4 types of dryer pricing Fixed Vend Pricing Accumulator PricingStart Operating Set-up Set-Up CodesExplanation Code ExplanationOptions 3.XX 9.XX to USE if Special Pricing is Selected Special Price Start Hour Code Explanation Value of CoinCd Payment Mode COIN/DEBIT Option CE Clear Escrow OptionMULTI-LOAD Washer and Dryer Warranty