Maytag W10335465B Connection Options, Connecting 4-Wire Connection Power Supply Cord

Page 24

ELECTRIC DRYER ELECTRICAL CONNECTIONS

Connection Options

Power Cord

Direct Wire

4-wire receptacle (NEMA Type 14-30R)

4-wire direct

3-wire receptacle (NEMA Type 10-30R)

3-wire direct

1"

(25

mm)

 

(127

5"

mm)

 

(89

3"

mm)

 

Connecting 4-Wire Connection: Power Supply Cord

IMPORTANT: A 4-wire connection is required for mobile homes and where local codes do not permit the use of 3-wire connections.

Standard Power Supply Cord Connectors

Flanged spade connector

Ring Connector

Connecting Ground and Neutral Wires

1.Remove center terminal block screw and the ground wire by removing the external ground connector screw.

Connecting Direct Wire Ground

3.Connect ground wire (green or bare) with external ground connector screw.

Connecting Remaining Wires

4.Connect remaining wires with outer terminal block screws.

2.Connect ground and neutral wire to center terminal block.

24

Image 24
Contents Installation Instructions Stacked WASHER/DRYER Safety Stacked WASHER/DRYER Safety Stacked WASHER/DRYER Safety Tools & Parts Tools NeededParts Supplied Alternate Parts and Accessories AccessoriesAlternate Parts DIMENSIONS/CLEARANCES DimensionsClearances Stacked WASHER/GAS Dryer Installation Requirements Stacked Washer/Gas Dryer LocationStacked Washer/Gas Dryer Electrical Requirements Stacked Washer/Gas Dryer GroundingStacked Washer/Gas Dryer Gas Supply Stacked WASHER/ELECTRIC Dryer Installation Requirements Stacked washer/electric dryer installation clearancesStacked Washer/Electric Dryer Location Stacked Washer/Electric Dryer Electrical Requirements It is your responsibility Electric Dryer Power Supply Cord If using a power supply cordDryer Electrical Requirements Electrical ConnectionDryer Direct Wire If connecting by direct wire Dryer Venting Requirements ElbowsClamps Rigid metal ventVent Hoods Vent System LengthIf an Exhaust Hood Cannot be Used Multiple Dryer VentingDryer GAS Supply Requirements Type of GasGas Supply Line Installing Stacked WASHER/DRYER Remove Transport SystemConnect Inlet Hoses Connect Inlet Hoses to WasherConnect Inlet Hoses to Water Faucets Clear Water LinesRoute Drain Hose Secure Drain HoseRemove drain hose from the washer drum Laundry tub drain or standpipe drainWasher Drain System Standpipe drain system wall or floorWall Laundry tub drain system FloorDirect Wire Strain Relief Power Supply Cord Strain ReliefElectric Dryer Electrical Connections Strain ReliefConnecting 4-Wire Connection Power Supply Cord Connection OptionsConnecting 3-Wire Connection Power Supply Cord Connecting 4-Wire Connection Direct WireStandard Power Cord Connectors Connecting Neutral WireConnecting 3-Wire Connection Direct Wire Connecting Remaining WiresConnecting 3-Wire Connection Optional LevelingLeveling Stacked Washer/Dryer Complete Installation Remove the Door Assembly Reversing Dryer Door SwingReverse Hinge Replace the Door Assembly Reinstall the doorReverse the strike Stacked WASHER/DRYER Maintenance Instructions Cleaning the Door Seal/Bellow To clean washer interiorMaintenance Instructions WasherIf YOU Need Assistance DryerElectronic Control Setup Instructions General Washer/Dryer User InformationWasher control Dryer controlControl Set-up Procedures How to Use the Buttons to Program the ControlsThere are four 4 types of dryer pricing Fixed Vend Pricing Accumulator PricingStart Operating Set-up Set-Up CodesExplanation Code ExplanationOptions 3.XX 9.XX to USE if Special Pricing is Selected Special Price Start Hour Code Explanation Value of CoinCd Payment Mode COIN/DEBIT Option CE Clear Escrow OptionMULTI-LOAD Washer and Dryer Warranty