Maytag W10335465B Options 3.XX 9.XX to USE if Special Pricing is Selected

Page 36

ELECTRONIC CONTROL SETUP INSTRUCTIONS

Code Explanation

1.00 MONEY COUNTER OPTION

This option is either NOT SELECTED “00” or

SELECTED “0C.”

1.00 Not Selected “00.”

1.0C Selected “0C.”

Press the lower-right (QUICK CYCLE) button

3 consecutive times to select “0C” and 3 consecutive times to deselect (Not Selected “00”). Counter resets by going from “OFF” to “ON.”

1.C0 Selected “C0” and not able to be deselected.

To select “C0” and not able to be deselected, first select “0C,” then within 2 seconds, press the lower-middle (DELICATES AND KNITS) button twice, the lower-left (PERM. PRESS) button once, and exit set-up mode.

Press the lower-middle (DELICATES AND KNITS) button once to advance to next code.

2.00 SPECIAL PRICING OPTIONS

This option is either NOT SELECTED “00” or

SELECTED “SP.”

2.00 Not Selected “00,” and next available code will be A.00

2. SP

Selected “SP.”

 

• Press the lower-right (QUICK CYCLE) button

 

once to change this selection.

If SPECIAL PRICING OPTION is selected, there is access to codes “3.XX” through “9.XX.”

Press the lower-middle (DELICATES AND KNITS) button once to advance to next code.

If money counter (1.0C or 1.C0) is selected, the following is true:

3 00

Dollars in HUNDREDS

3 01 = $

100.00

4 00

Dollars in ONES

4 68 = $

68.00

5 00

Number of CENTS

5 75 = $

00.75

 

 

 

 

TOTAL = $168.75

OPTIONS 3.XX – 9.XX TO USE IF SPECIAL PRICING IS SELECTED

Code Explanation

3.07 SPECIAL CYCLE PRICE (WASHER)

3.07 Represents the number of quarters (coin 1) to start the washer; may adjust from 0–39. (See VALUE OF COIN 1.)

Advance from 0–39 by pressing the lower-left

(PERM. PRESS) button. Factory default of 7 quarters = $1.75

3.00 PR MODELS ONLY: Factory default of 0 quarters.

Press the lower-middle (DELICATES AND KNITS) button once to advance to next code.

3.06SPECIAL CYCLE PRICE (DRYER)

3.06Represents the number of quarters (coin 1) to start the dryer; may adjust from 0–39. (See VALUE OF COIN 1).

Advance from 0–39 by pressing the upper-left

(WHITES & COLORS) button. Factory default of 6 quarters = $1.50.

3.00PR MODELS: Factory default of 0 quarters.

Press the lower-middle (DELICATES AND KNITS) button once to advance to next code.

4.05SPECIAL DRY TIME (DRYER)

4.05PD MODELS: Represents the number of minutes per quarter (coin 1).

Factory default of 5 minutes per coin.

Example: 6 quarters x 5 minutes = 30 minutes.

By pressing the upper-left (WHITES & COLORS) button, the value can be adjusted from 1–99 minutes.

4.45PR MODELS: Represents the fixed cycle time

in minutes. Example: “4 45” = 45 minutes.

Press the lower-middle (DELICATES AND KNITS) button once to advance to next code.

5.00 TIME-OF-DAY CLOCK, MINUTES

5.00 This is the TIME-OF-DAY CLOCK, minute setting; select 0–59 minutes by pressing the lower-left (PERM. PRESS) button.

Press the lower-middle (DELICATES AND KNITS) button once to advance to next code.

6.00 TIME-OF-DAY CLOCK, HOURS

NOTE: Uses military time or 24 hr. clock.

6.00 This is the TIME-OF-DAY CLOCK, hour setting; select 0–23 hours by pressing the lower-left (PERM. PRESS) button.

Press the lower-middle (DELICATES AND KNITS) button once to advance to next code.

36

Image 36
Contents Installation Instructions Stacked WASHER/DRYER Safety Stacked WASHER/DRYER Safety Stacked WASHER/DRYER Safety Tools & Parts Tools NeededParts Supplied Alternate Parts and Accessories AccessoriesAlternate Parts DIMENSIONS/CLEARANCES DimensionsClearances Stacked WASHER/GAS Dryer Installation Requirements Stacked Washer/Gas Dryer LocationStacked Washer/Gas Dryer Electrical Requirements Stacked Washer/Gas Dryer GroundingStacked Washer/Gas Dryer Gas Supply Stacked WASHER/ELECTRIC Dryer Installation Requirements Stacked washer/electric dryer installation clearancesStacked Washer/Electric Dryer Location Stacked Washer/Electric Dryer Electrical Requirements It is your responsibility Electric Dryer Power Supply Cord If using a power supply cordDryer Electrical Requirements Electrical ConnectionDryer Direct Wire If connecting by direct wire Dryer Venting Requirements ElbowsClamps Rigid metal ventVent Hoods Vent System LengthIf an Exhaust Hood Cannot be Used Multiple Dryer VentingDryer GAS Supply Requirements Type of GasGas Supply Line Installing Stacked WASHER/DRYER Remove Transport SystemConnect Inlet Hoses Connect Inlet Hoses to WasherConnect Inlet Hoses to Water Faucets Clear Water LinesRoute Drain Hose Secure Drain HoseRemove drain hose from the washer drum Laundry tub drain or standpipe drainWasher Drain System Standpipe drain system wall or floorWall Laundry tub drain system FloorDirect Wire Strain Relief Power Supply Cord Strain ReliefElectric Dryer Electrical Connections Strain ReliefConnecting 4-Wire Connection Power Supply Cord Connection OptionsConnecting 3-Wire Connection Power Supply Cord Connecting 4-Wire Connection Direct WireStandard Power Cord Connectors Connecting Neutral WireConnecting 3-Wire Connection Direct Wire Connecting Remaining WiresConnecting 3-Wire Connection Optional LevelingLeveling Stacked Washer/Dryer Complete Installation Remove the Door Assembly Reversing Dryer Door SwingReverse Hinge Replace the Door Assembly Reinstall the doorReverse the strike Stacked WASHER/DRYER Maintenance Instructions Cleaning the Door Seal/Bellow To clean washer interiorMaintenance Instructions WasherIf YOU Need Assistance DryerElectronic Control Setup Instructions General Washer/Dryer User InformationWasher control Dryer controlControl Set-up Procedures How to Use the Buttons to Program the ControlsThere are four 4 types of dryer pricing Fixed Vend Pricing Accumulator PricingStart Operating Set-up Set-Up CodesExplanation Code ExplanationOptions 3.XX 9.XX to USE if Special Pricing is Selected Special Price Start Hour Code Explanation Value of CoinCd Payment Mode COIN/DEBIT Option CE Clear Escrow OptionMULTI-LOAD Washer and Dryer Warranty