Installation
Parts and literature are packaged inside the dryer drum.
WARNING
Excess Weight Hazard
Use two or more people to move and install the dryer.
Failure to do so can result in back or other injury.
Only remove the packaging at the customer’s premises.
This will ensure the appliance arrives in pristine condition and reduces the risk of damage when transporting to the customer’s home.
Unpacking
Make sure dryer is in a suitable location for installation.
Consider installing the dryer before the washing machine in a side by side installation, this will allow better access to electrical and exhaust connections.
Remove packaging
1.
1.Remove straps.
4.
4.Remove the carton by lifting it off the product (do not cut the carton off ).
2. |
2.Unfold the bottom flaps on the carton.
5.
Tilt
Walk
off
Slide out
5.Remove the basepacker by tilting the product back and walking the product.
3. |
3.Unfold the top flaps on the carton, remove top packer.
6. |
6.Remove the drum packer and the tape from the lint collector bucket in the drum.
14