Electrolux TK SL5 E user manual Long ANTI-CREASE

26electrolux

If the STEAM LEVEL (Dampfmenge) button is not pressed after a Pro Steam pro- gramme is selected, the medium steam level (MED) is selected automatically. If you select a REFRESH programme, MIN is selected automatically.

If in doubt, always select a lower steam level first until you have more ex- perience with load volumes, fabric types and the corresponding optimum steam level. If too high steam level is selected, garments may lose their shape. If too low steam level is selected, creases may remain.

Selecting additional options

The additional options available for the Pro Steam programmes are LONG ANTI- CREASE, BUZZER, SPIN SPEED1) and the CHILD LOCK.

1.By turning the knob choose a Pro Steam programme.

2.To set the option press OPTION button. you will see available options on the screen.

3.Press repeatedly OPTION button to select proper option. Selection is marked by rectangular border.

4.Press OK button to activate it. Suitable icon should appear on the right side of the screen.

To deselect an option follow the same steps. Option icon should disappear.

LONG ANTI-CREASE

A 90 minute anti-crease phase is set. The display now shows the long anti-crease icon. If this additional option is selected, the anti-crease phase (30 min.) at the

end of the Pro Steam cycle is lengthened by 60 minutes. The laundry can be re- moved at any time during the anti-crease phase.

BUZZER

The appliance is supplied with the BUZZER function deactivated. The button is used to switch the function on or off. When the function is active, the BUZZER symbol appears in the display.

The buzzer sounds or plays a tune during:

–cycle end

–anti-crease phase and when phase starts or ends

1) available with cotton/easy care and cotton/synthetic shirts programmes