48electrolux
Loading door does not close. Message on the display: Please check if the door is closed properly and then press
START.
When a button is pressed - no reaction of the ma- chine.
Drum light does not work.
Displayed programme time changes erratically or stays unchanged for a long time.
Programme inactive, massages: The tank is full. Please empty it and then press START or Please
empty the tank. are dis- played.
Drying cycle ends shortly after programme starts. Finished message is dis- played.
Conductance of water at installation site differs from standard setting of machine.
Fine strainer not in place and/or mesh filter not locked in place.
Drying protection. After the start of the pro- gramme, the option can no longer be set.
Programme selector in OFF position.
Defective light bulb.
Programme time is cor- rected automatically de- pending on type and vol- ume of laundry and level of dampness.
Condensate tank is full.
Not enough washing loa- ded or washing loaded is too dry for selected pro- gramme.
Install fine strainer and/or snap large mesh filter into place.
Turn the programme knob to OFF. Set the pro- gramme again.
Turn programme selector to LIGHT or to any pro- gramme.
Replace light bulb (see next section).
Automatic process; this is not a machine fault.
Empty condensate tank, then start programme with START PAUSE but- ton.
Select time programme or higher drying level (e.g. INTENSIVE DRY instead of STORAGE DRY).