Electrolux TK SL5 E user manual Child Lock

Page 27

electrolux 27

cycle interruption by a warning

alarm

CHILD LOCK

The child lock can be set to prevent a programme being accidentally started or a programme in operation being accidentally changed. The child safety device locks all buttons and the programme knob. The child safety device can by deactivated by holding down the OPTION and OK buttons simultaneously for 5 seconds.

Before programme is started: appliance cannot be used

After programme is started: programme in operation cannot be changed

The child lock icon appears in the display to indicate that the child lock is acti- vated. The child lock is not deactivated once the programme comes to an end. If you want to set a new programme, you must first deactivate the child lock.

SPIN SPEED

If the washing in the washing machine was initially drained prior to the Pro Steam cycle, the dryer can be set according to the spin speed of the initial drainage pro- cedure. The higher the spin speed was, the shorter the programme length for the drying cycle.

Activate the SPIN SPEED option and then number of times press OPTION button until the desired spin speed of the initial drainage is displayed. No value is shown if no spin speed is selected.

In certain programmes the spin speed has not effect (time controlled cycles), its selection can be not selectable and only three dashes are visualized. Available se- lections: from 800 to 1800 rpm's in 100 rpm's intervals.

The maximum value depends by selected program, the minimum is always 800 rpm For those programs where the spin speed has no effect (time controlled cycles), the selection is not allowed and three dashes “- - -” are displayed that has the meaning of not set or unknown.

The user interface always remembers last spin selection, and proposes it as default for all new selected programs. If memorized spin speed is greater than maximum allowed value it will be automatically reduced to max spin speed available for the selected program.

Setting DELAY function (Zeitvorwahl)

With the DELAY (Zeitvorwahl) button, you can delay the start of a Pro Steam programme by between 30 minutes and a maximum of 20 hours.

1. Select the programme and additional functions/options if necessary.

Image 27
Contents Pro Steam Condenser Dryer We were thinking of you Welcome to the world of Electrolux Electrolux Contents Operating Instructions Operating Instructions Important safety information electroluxElectrolux important safety information Use InstallationChild safety Important safety information electrolux Electrolux product description Product descriptionStart Pause button Delay Start Zeitvorwahl button What is shown in the displayControl panel Switching machine on / switching light on Setting the languageFirst start-up Einstellungen Before first use Sorting laundry Sorting and preparing laundryOpening loading door / loading laundry Special notes about Pro SteamClose loading door securely. Lock must audibly lock Fill steam water tank Pro Steam systemWater recirculation system Electrolux Programmes Overview of Pro Steam programmesAdditional func- tions / options Electrolux Stea M Level Damp fmeng e Stea Long ANTI-CREASE Child Lock Starting the Pro Steam programme Pro Steam programme complete / removing laundry Laundry and drum can become hot. Risk of burnsTurn the programme knob to OFF Drying programmes overview DryingDry Additional functions Options Programmes RPM Setting Dryness Level Delicate Selecting Delay Start Zeitvorwahl Selecting TimeStarting the drying programme Drying programme complete / removing laundry Electrolux care and cleaning Cleaning fluff filterCare and cleaning electrolux Clean the entire filter area Emptying the condensate tank Cleaning the door sealElectrolux Cleaning heat exchanger Never operate the dryer without the heat exchanger Cleaning the water recirculation valve/filterCleaning the drum What to do if Clean operating screen and housingMulti-layered garments tend to lose their shape Empty the tank. are dis- played Changing the bulb for interior lighting Language Machine settingsTime Contrast Technical data Loading volume in kg Energy consumption KWh Electrolux consumption valuesProgramme Appliance positioning Hints for test institutes electroluxAppliance must be moved in vertical position for transport Removing transport safety packaging Before changing the door stop, disconnect the mains plug Installation electroluxElectrical connection Changing door stopElectrolux Installation Intermediate installation kit for stacked washer and dryer Special accessoriesOld appliance Packaging materialEnvironmental tips Environment electroluxPre-draining Drying cycle Electrolux Page 136901221-00-04102007