Electrolux TK SL5 E user manual Cleaning the door seal, Emptying the condensate tank

Page 41

care and cleaning electrolux 41

If the fine strainer is not fitted, the large mesh filter will not snap into place and the loading door cannot be closed.

Cleaning the door seal

Wipe the door seal with a damp cloth immediately after the drying cycle has finished.

Emptying the condensate tank

Empty condensed water container after every drying cycle.

Emptying of condensate water tank can be limited or fully eliminated in case of:

open recirculation system if you use Pro Steam programmes (See section Water recirculation system)

direct drain system installation (See section Special accessories)

If the condensate tank is full, an active programme will break off automatically and the message The tank is full. Please empty it and then press START. is shown in the display. In order to continue the programme, the condensate tank must first be emptied.

The condensate is not suitable for drinking or for preparing foodstuffs.

Image 41
Contents Pro Steam Condenser Dryer We were thinking of you Welcome to the world of Electrolux Electrolux Contents Operating Instructions Operating Instructions Important safety information electroluxElectrolux important safety information Use InstallationChild safety Important safety information electrolux Electrolux product description Product descriptionControl panel Start Pause button Delay Start Zeitvorwahl buttonWhat is shown in the display First start-up Switching machine on / switching light onSetting the language Einstellungen Before first use Sorting laundry Sorting and preparing laundryOpening loading door / loading laundry Special notes about Pro SteamClose loading door securely. Lock must audibly lock Fill steam water tank Pro Steam systemWater recirculation system Electrolux Programmes Overview of Pro Steam programmesAdditional func- tions / options Electrolux Stea M Level Damp fmeng e Stea Long ANTI-CREASE Child Lock Starting the Pro Steam programme Pro Steam programme complete / removing laundry Laundry and drum can become hot. Risk of burnsTurn the programme knob to OFF Drying programmes overview DryingDry Additional functions Options Programmes RPM Setting Dryness Level Delicate Starting the drying programme Selecting Delay Start ZeitvorwahlSelecting Time Drying programme complete / removing laundry Electrolux care and cleaning Cleaning fluff filterCare and cleaning electrolux Clean the entire filter area Emptying the condensate tank Cleaning the door sealElectrolux Cleaning heat exchanger Never operate the dryer without the heat exchanger Cleaning the water recirculation valve/filterCleaning the drum What to do if Clean operating screen and housingMulti-layered garments tend to lose their shape Empty the tank. are dis- played Changing the bulb for interior lighting Language Machine settingsTime Contrast Technical data Programme Loading volume in kg Energy consumption KWhElectrolux consumption values Appliance must be moved in vertical position for transport Appliance positioningHints for test institutes electrolux Removing transport safety packaging Electrical connection Installation electroluxChanging door stop Before changing the door stop, disconnect the mains plugElectrolux Installation Intermediate installation kit for stacked washer and dryer Special accessoriesOld appliance Packaging materialPre-draining Drying cycle Environmental tipsEnvironment electrolux Electrolux Page 136901221-00-04102007