Electrolux TK SL5 E user manual Multi-layered garments tend to lose their shape

electrolux 47

After a Pro Steam pro- gramme, there are no creases left in the gar- ments.

Clothes are not removed until the anti-crease phase is finished.

Garments not hung on clothes hangers and/or not tugged into shape.

Multi-layered garments tend to lose their shape.

The Pro Steam pro- gramme has the effect of smoothing garments.

Wrong programme selec- ted.

Remove clothes quickly one at a time from the ma- chine as soon as possible after the start of the anti- crease phase.

Hang garments on clothes hangers, do up buttons and tug garments into shape.

Reshape multi-layered garments by ironing after they come out of the ma- chine.

Iron creases in again after the Pro Steam pro- gramme.

Select a different pro- gramme the next time you dry (see “Programme chart” chapter).

Drying results unsatisfactory.

Lint filters clogged.

Fluff filter clogged.

Heat exchanger clogged with lint.

Overloading of laundry.

Ventilation slots in base area covered up.

Residue on inside surface of drum or drum ribs.

Clean lint filters.

Clean fluff filter.

Clean heat exchanger.

Observe recommended loading volumes.

Uncover ventilation slots in base area.

Clean inside surface of drum and drum ribs.

Make an adjustment us- ing the DRYNESS func- tion (see chapter ”Drying”)