46electrolux
Clean operating screen and housing
Do not use furniture cleaners or aggressive cleaning agents to clean the machine.
Use a damp cloth to wipe down the operating screen and housing.
What to do if ...
Troubleshooting by yourself
If, during operation, the warning message appears on the LCD follow strictly guides included in the massage on the display. If you are not able to solve the problem
Problem
Dryer does not work.
Pro Steam programme does not start. Message on the display: The steam water tank is empty. Please fill it and then press
START.
After a Pro Steam pro- gramme, garments are not sufficiently smooth.
Possible cause
Mains plug is not plugged in or fuse is not working correctly.
Loading door is open.
Have you pressed the START PAUSE button?
Water tank is empty.
Recirculation valve is closed (OFF position)
Wrong programme selec- ted (e.g. SYNTHETICS Mischegewebe) (instead of COTTON(Baumwolle)).
Too low a steam level set.
Too many garments in machine, or garments that are too different.
Remedy
Plug in at mains socket. Check fuse in fuse box (domestic installation).
Close loading door.
Press the START PAUSE button again.
Fill water tank.
Turn the recirculation valve to ON position.
Note the composition of the fabric.
Set a higher steam level.
Load the machine with fewer garments, or only similar ones.