installation electrolux 57
3.
Remove foil hose and polystyrene padding from the machine.
Electrical connection
Details on mains voltage, type of current and the fuses required should be taken from the type plate. The type plate is fitted near the loading aperture (see “Product description” chapter).
Connect the machine to an earthed socket, in accordance with current wiring regu- lations.
The manufacturer declines any responsibility for damage or injury through failure to comply with the above safety precautions. Should the appliance power supply cable need to be replaced, this must be carried out by our Service Center.
The power supply cable must be accessible after installing the machine.
Changing door stop
The door stop may only be changed by a specialist. If necessary, please contact our