Electrolux TK SL5 E user manual Laundry and drum can become hot. Risk of burns

electrolux 37

It is normal for the appliance to make noises during drying programme if garments with hard parts, such as metal buttons, are put in the drum.

Changing a programme

To change a programme which has been selected by mistake once the programme has started, first turn the programme selector to OFF and then reset the programme.

The programme can no longer be changed directly once the programme has started. If you nevertheless attempt to change the programme with the programme knob the following message is shown:

Please turn programme selector to the last used position. The drying programme is not however affected by this.

Putting in extra items or taking items out before end of programme

1. Open loading door.

Laundry and drum can become hot. Risk of burns!

2.Load or remove laundry items.

3.Close loading securely. Lock must audibly lock.

4.Press the START PAUSE button to continue the drying cycle.

Drying programme complete / removing laundry

After the drying cycle is completed , 0:00 starts flashing and alternatively the messages: Finished. Please remove the laundry and Anti-creaseappear in the dis- play. If the buzzer has been activated, an audible signal sounds at regular intervals.

The drying programme is automatically followed by an anti-crease phase, including brief steam phases, which lasts around 30 minutes.

The drum rotates during the anti-crease phase. This keeps the laundry loose and free of creases. It can be removed at any time during the anti- crease phase. Laundry should be removed as quickly as possible to prevent creases from forming.