Electrolux 134709300, EWMED65H, 137018200 A, 134912700 Water connection Steam Model only

Installation Instructions 15

Water connection (Steam Model only)

1.Turn off COLD water supply to washer,

2.Remove COLD inlet hose from COLD water supply and inspect for rubber washer. Replace washer if it is torn or worn out.

RUBBER WASHER

MUST BE PRESENT

AND UNDAMAGED

COLD INLET HOSE

TO WASHER

3.Momentarily turn on COLD supply and run some water into a bucket or container to clear any contaminants in the line.

4.Remove hose kit from dryer drum and inspect hose couplings for proper placement of rubber washers.

RUBBER WASHERS

MUST BE PRESENT