24Reversing Door
L) Reversing Trim Ring
1Trim ring orientation is marked on the back.
2Remove trim ring cover plate. To remove plate from left, pivot point is down. To remove plate from right, pivot point is up.
UP
3Rotate and move trim ring cover plate to opposite opening in trim and reinsert.
M) Reinstalling Trim Ring
1 Close door.
2Orient trim so 12 position is approximately ¾” to the left of top center. Opening in ring should be on the hinge side.
3Insert trim ring in slots and rotate clockwise approximately ¾”.
N) Reinstalling Trim Plug
1Open door to 90 degree angle.
2Install trim plug with 1 long,