E. CLEARING CREDIT/CLEARING CYCLE
Credit can be cleared from either dryer pocket by using the following key combination. With the program switch down, press and hold the “PAUSE” 
key while entering 
key three (3) times followed by the “LO” 
key two (2) times and then the “MED” 
key one (1) time. Wait 
button and one (1) of the remaining keys. This will clear the credit.
A cycle in free mode can be cleared by one (1) of the following two (2) options. The same key combination as clearing credit in coin mode can be used. With the program switch down, press and hold the “PAUSE” 
key while entering the following key combination: 
button and one (1) of the remaining keys. This will clear the cycle. Another way of clearing a cycle in free mode is to press and hold the “PAUSE” 
key for
F. ACCESSING COIN VAULT
The coin vault can be accessed by placing the program switch into the “UP” position. Once the program switch is in the “UP” position, press the “HI” 
key. The controller will now display the amount of money in the coin
vault. Press the “HI” 
key again and the controller will ask to “CLEAR COIN VAULT TOTAL?” Press
“PAUSE” 
for “NO” and press “MED” 
for “YES.”
G. WRINKLE GUARD
This program keeps items
When the drying and cooling cycles are completed, the dryer will shut off, the tone will sound, and the liquid crystal display (L.C.D.) will read “CYCLE DONE.” If the door is not opened, the Phase 7 dual coin microprocessor controller (computer) will wait an initial 15 minutes delay time. Once the initial 15 minute delay time has expired, the fan will start and the basket (tumbler) will rotate (without heat) for an ON time of
Maytag | 31 |