L. OPERATING INSTRUCTIONS
NOTE: Before attempting to start the dryer make sure that the main door is closed and the lint drawer is securely in place.
1.To Start The Dryer
a. Microprocessor Controller (Computer) Dryer Models
1)Display will read “FILL” (meaning no cycle in progress).
2)Press the letter on the keyboard (touch pad) corresponding to the cycle desired (i.e., “E”)...
a)The dryer will then start (rotate).
3)Light emitting diode (L.E.D.) display will now show the Cycle In Progress and Cycle Status (i.e., “dr30”) meaning that the dryer is in the drying cycle (dry mode for 30 minutes) and count down in minutes.
NOTE: The dryer can be stopped at any time by opening main door or by pressing the “CLEAR/ STOP” key. To restart the dryer, press the “ENTER/START” key or preprogrammed cycle key (i.e., “E”).
NOTE: Pressing keyboard (touch pad) key “A,” “B,” “C,” “D,” and “F” will also start the dryer. The six (6) preprogrammed drying cycles (“A” through “F”) have been stored in the microprocessor controller’s (computer’s) memory. Refer to the computer programming manual supplied with this dryer for more specific operating information.
NOTE: Selection (setting) changes can be made at any time during the drying cycle by pressing the “CLEAR/STOP” key twice. The L.E.D. display will return to “FILL” at which time a new cycle selection can be made.
b.Dual Timer Dryer Models
1)Select drying time and cool down time desired...
a)Turn heat timer clockwise (CW) to desired time (i.e., 1 minute to 60 minutes).
b)Turn cool down timer clockwise (CW) to desired time (i.e., 0 minutes to 15 minutes).
2)Select drying temperature (“HI TEMP,” “LO TEMP,” or “PERM PRESS”).
3)Push “Push To Start” switch...
a)Dryer will now start.
4)To stop dryer, open the main door.
40