American Dryer Corp AD-120ES II installation manual Electric Models

Page 59

3.Failed lint compartment automatic (225º F [107.2° C]) safety thermostat circuit.

4.Failed Direct Spark Ignition (DSI) module (burner control).

5.Failed DSI ignitor/flame-probe assembly.

6.Failed heat selector switch.

ELECTRIC MODELS

1.Fault in sail switch circuit...

a.Sail switch is out of adjustment and/or has failed.

b.Sail switch is not closing or is fluttering...

1)Check blower (impellor/fan) motor and rotation direction.

2)Restriction in exhaust ductwork.

2.Failed oven hi-limit circuit.

3.Failed lint compartment automatic (225º F [107.2 ° C]) safety thermostat circuit.

4.Failed oven contactor (relay).

5.Failed heat selector switch.

STEAM MODELS

1.Steam damper binding and/or stuck.

2.No (external) compressed air to the steam damper...80 PSI (5.51 bars) is required.

3.Failed lint compartment (225º F [107.2° C]) safety thermostat circuit.

4.Failed steam damper 24 VAC pneumatic solenoid switch.

5.Airflow control valve restricting incoming compressed air.

6.Failed heat selector switch.

7.Failed steam damper piston.

G. Heat unit is not operating for ONLY one (1) temperature selection...

1.Failed thermostat corresponding to selection made.

2.Failed heat selector switch.

55

Image 59

Contents AD-120ES Retain This Manual In a Safe Place For Future Reference For Your Safety Page Table of Contents Data Label Cleaning Adjustments LubricationReceiving and Handling Important InformationWhat to do if YOU Smell GAS Safety PrecautionsStandards Specifications SPECIFICATIONS/COMPONENT IdentificationADG-120ES ADE-120ES ADS-120ES Component Identification Page Location Requirements Installation ProceduresUNPACKING/SETTING UP Page This Exhaust Duct Transition Piece Must be Installed First Dryer Enclosure Requirements Fresh AIR Supply Requirements Exhaust Requirements Page Downstream of Dryer Page Page Page Electrical Information Electrical Service Specifications PER Dryer ADE-120 II 72 Kw Electric Reversing, 3ø ADE-120 II 80 Kw Electric Reversing, 3ø Page Page GAS Information Type of GAS Page Page 204 kg/hr Steam Information862.84 kPa 689.47 kPaPage Bars Page Preparation for Operation Preoperational Tests Inches 26.1 mb water column Basket Coating Shut Down InstructionsOperating Instructions Parts SERVICE/PARTS InformationService Returning Warranty Parts Warranty InformationReturning Warranty Cards WarrantyPage Suggested Cleaning Schedule Routine MaintenanceCleaning Steam Dryers Lubrication AdjustmentsDrive motor is not operating does not start TroubleshootingBlower motor is not operating does not start Microprocessor controller computer display reads door Microprocessor controller computer display reads dSFLFailed 24 VAC transformer No heat for Electric Models only No heat for Steam Models only Condensation on main door glass Dryer operates but is taking too long to dryExcessive noise and/or vibration Dryer is making scraping noise at basket tumbler areaGAS Models Drive motor only is not operating does not startElectric Models Failed hi-limit thermostat for GAS and Electric Models only Dryer operates but is taking too long to dry loadCondensation on main door glass Data Label Data Label InformationSerial Number Timing Legend Reversing Timer SPIN/DWELL AdjustmentsProcedure for Functional Check Replacement Components Page Page P O R T a N T ADC P/N114501 ADC 02/07/01-25 02/12/01-25 04/06/01-25 06/27/01-25