DRYING RACK (SELECT MODELS)
INSTALLING THE DRYING RACK
1) Open dryer door.
2) Position drying rack in tumbler placing the two rear legs in the two recessed areas in the back wall of the dryer.
3) Place the front lip of the drying rack on top of the lint filter.
4) Place items to be dried on the rack, leaving space between them so air can reach all the surfaces.
5) Close the dryer door.
6) Use the Time Dry cycle. Select time according to | Handle | |
moisture and weight of item. Start the dryer. It may be | ||
Rear Legs | ||
necessary to reset the timer if a longer drying time is | ||
Front | ||
needed. |
|
USING THE DRYING RACK
SUGGESTED ITEMS | SUGGESTED | |
TEMP. SETTINGS | ||
|
| |
Washable sweaters (block to | Heat | |
shape and lay flat on rack) | ||
| ||
|
| |
Stuffed toys (cotton or | Heat | |
polyester fiber filled) | ||
| ||
|
| |
Stuffed toys (foam or | Air Fluff | |
rubber filled) | ||
| ||
|
| |
Foam rubber pillows | Air Fluff | |
|
| |
Sneakers | Air Fluff or Heat |
WARNING
Drying foam rubber, plastic or rubber on a heat setting may
cause damage to the item and could lead to a fire hazard.
STORING THE DRYING RACK
On Dryer Sides:
The drying rack hanger fits between the dryer top and the dryer cabinet.
1)Place the flange on the hanger in the seam between the top and the cabinet. Push all the way in.
Flange
2) Face the top of the drying rack toward the side of the dryer cabinet.
Lip
3) Place the drying rack handle over the lip of the hanger.
On Dryer Back:
1) Place the drying rack hanger between the dryer top and the dryer cabinet just below the back of the control panel.
2)Place the flange in the seam and push all the way in.
3)Face the top of the drying rack toward the back of the dryer cabinet.
4)Place the drying rack handle on the lip of the hanger.
NOTE: If not included with your dryer, contact your Maytag dealer for the accessory kit MAL1100AXX
or call
10