Maytag W10131619A installation instructions Important Safety Instructions

Page 3

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the dryer, follow basic precautions, including the following:

Read all instructions before using the dryer.

Do not repair or replace any part of the dryer or attempt

Do not place items exposed to cooking oils in your dryer.

any servicing unless specifically recommended in this

Items contaminated with cooking oils may contribute to

Use and Care Guide or in published user-repair

a chemical reaction that could cause a load to catch fire.

instructions that you understand and have the skills to

Do not dry articles that have been previously cleaned in,

carry out.

Do not use fabric softeners or products to eliminate static

washed in, soaked in, or spotted with gasoline, dry-

unless recommended by the manufacturer of the fabric

cleaning solvents, or other flammable or explosive

softener or product.

substances as they give off vapors that could ignite or

Do not use heat to dry articles containing foam rubber or

explode.

Do not allow children to play on or in the dryer. Close

similarly textured rubber-like materials.

Clean lint screen before or after each load.

supervision of children is necessary when the dryer is

used near children.

Keep area around the exhaust opening and adjacent

Before the dryer is removed from service or discarded,

surrounding areas free from the accumulation of lint, dust,

remove the door to the drying compartment.

and dirt.

Do not reach into the dryer if the drum is moving.

The interior of the dryer and exhaust vent should be

Do not install or store the dryer where it will be exposed

cleaned periodically by qualified service personnel.

See installation instructions for grounding requirements.

to the weather.

Do not tamper with controls.

 

SAVE THESE INSTRUCTIONS

3

Image 3
Contents W10131619A Electric DryerDryer Safety Table of ContentsImportant Safety Instructions Installation Instructions Tools and PartsLocation Requirements Electrical Connection Mobile Home Additional Installation RequirementsElectrical Requirements It is your responsibilityIf your outlet looks like this If using a power supply cordIf connecting by direct wire Gauge solid copper wire do not use aluminumElectrical Connection Power Supply Cord Direct WireStyle 1 Power supply cord strain relief Install strain reliefStyle 2 Direct wire strain relief Wire connection Power Supply Cord Wire connection Direct Wire Loosen or remove center silver-colored terminal block screw CG FTighten strain relief screw Optional 3-wire connectionIf using an existing vent system Venting RequirementsIf this is a new vent system Vent material Angled hood style shown here is acceptable Plan Vent SystemExhaust Recommended hood styles are shown hereVent system chart Install Vent SystemAlternate installations for close clearances Special provisions for mobile home installationsReverse Door Swing Optional Install Leveling LegsConnect Vent Level DryerIf the dryer will not start, check the following Complete InstallationStopping and Restarting Dryer USEStarting Your Dryer How Automatic Drying WorksDrying Rack Option Cleaning the Dryer LocationCleaning the Lint Screen Dryer CareCleaning the Dryer Interior Removing Accumulated LintVacation and Moving Care Troubleshooting Dryer OperationDryer Results Cycle time too short Lint on loadStains on load or drum Loads are wrinkledPart Number Accessory Assistance or ServiceAccessories Enhance your dryer with these premium accessoriesW10131619A