Humminbird 67 manual Save, Edit, or Delete a Waypoint

Page 26

Save, Edit, or Delete a Waypoint

Save your current position as a waypoint: On any view, press the MARK key to save the current position of the boat as a waypoint.

Save the cursor position as a waypoint: On the Chart or Combo view, use the Cursor key to designate the position you want to save as a waypoint. Then press the MARK key to save the marked position as a waypoint.

Save a position from the sonar history: On the Sonar view, use the Cursor key to point to a feature in the sonar history (also called the Sonar Saver feature). Press the MARK key to create a waypoint at the location where that sonar reading was taken. The new waypoint will also record the depth at that location.

NOTE: When you save a waypoint by any of these methods, a numerical waypoint name is automatically assigned. You can edit the waypoint information later to give it a different name and select an icon to represent it (see Waypoint submenu on the Navigation Main Menu Tab).

Display the Waypoints Submenu: From any view, press the MENU key twice to display the Main Menu System, then use the RIGHT Cursor key to select the Navigation tab. Select Waypoints and press the RIGHT Cursor key to display the Waypoints submenu.

Program a specific position as a waypoint: To create a waypoint that is NOT your current position, from the Waypoints submenu, select the Create option and press the RIGHT Cursor key. Use the Cursor keys to program a waypoint name, latitude, longitude, and icon before selecting Save.

Edit a waypoint: From the Waypoints submenu, select Edit and press the RIGHT Cursor key to display a list of saved waypoints. Select the waypoint you want to edit and press the RIGHT Cursor key. Use the 4-WAY Cursor Control key to move from field to field, and the UP and DOWN Cursor keys to changes values once you are in a field. In the Waypoint Name, Latitude and Longitude fields, use the UP and DOWN Cursor keys to change the letter or number. All upper and lower case letters are available, as well as digits 0-9 and some punctuation characters. In the Waypoint Icon field, use the UP and DOWN Cursor keys to change the icon used to represent the waypoint on the Combo and Chart Views. You can exit these fields with the LEFT and RIGHT Cursor keys or by pressing the EXIT key. Select Save and press the RIGHT Cursor key to save your changes.

To make it easier to select a waypoint, select Sort By and press the RIGHT or LEFT Cursor keys to select a sort order:

•Name shows the waypoints alphabetically

•Time shows the most recently-created waypoint first

•Distance shows the closest waypoint first.

20

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Matrix 67GPS Trackplotter Operations Manual Thank You Table of Contents Sonar Menu Tab Sonar X-Press Menu Sonar Views OnlyNavigation X-Press Menu Navigation Views Only Navigation Menu Tab Alarms Menu TabSetup Menu Tab Accessories Menu Tab Troubleshooting QuadraBeam Sonar How Sonar WorksDualBeam Plus Sonar With Optional-Purchase WideSide Transducer WideSide SonarHow GPS and Cartography Work Multi-Media Card MMC Detailed MapWhat’s On the Sonar Display Bait Ball Hard Bottom Rocky Bottom83 kHz, Wide Beam Hollow Fish Symbol To your boat, including the following itemsSonar View ViewsSonar views Zoom ViewSonar View Sonar ViewUnderstanding Sonar History Real Time Sonar RTS WindowBottom Presentation Bottom Contour Profile with RTS WindowPage Sonar Zoom View Sonar Zoom View200/83 kHz Split Sonar View 200/83 kHz Split Sonar ViewBig Digits View Big Digits ViewSide Beam View Side Beam ViewWideSide View WideSide ViewBird’s Eye View Bird’s Eye ViewChart View Chart View with Active CursorViewing Cartography Combo ViewView Orientation Combo ViewPage Waypoints, Routes and Tracks Introduction to NavigationWaypoints, Routes and Tracks Save, Edit, or Delete a Waypoint Navigate to a Waypoint or Position Chart View with Grid Add a Waypoint Target or Trolling GridSave, Edit or Delete a Route Save or Clear a Current Track Edit, Delete or Hide Saved TracksView Key POWER/LIGHT KeyKey Functions Info KeyMark Key Menu KeyWAY Cursor Control Key Exit Key Goto KeyZoom +/- Key Matrix 67 Title Screen Accessory BusPowering Up the Unit Main Menu System Normal User Mode Menu SystemSonar Tab, Normal Mode Sonar Tab, Advanced Mode Simulator Start-Up Options MenuNormal Operation System Status Self Test Accessory Test GPS Diagnostic ViewAccessory Test Screen System Status Self Test ScreenWith PC Connect Cable Only GPS Diagnostic ViewPC Connect Sonar Views Only To adjust the WideSide ViewSonar X-PressTMMenu Sonar X-PressTMMenuHighlight Sensitivity on the Sonar X-PressTMmenu To adjust the SensitivitySensitivity Sensitivity at Low Sensitivity at MediumTo adjust the Upper Range Upper RangeHighlight Lower Range on the Sonar X-PressTMmenu To adjust the Lower RangeLower Range To adjust the Chart Speed Chart SpeedTo adjust the Side Beam Range Highlight Chart Speed on the Sonar X-Press menuBottom View To adjust the Bottom ViewTo adjust the Zoom Level Zoom LevelClear Current Track Navigation X-PressTMMenuSave Current Track Skip Next Waypoint Cancel NavigationSave Current Route Sonar Window Remove TargetRemove Grid Sonar Menu Tab Sonar MenuHighlight Beam Select on the Sonar main menu Beam SelectTo use Beam Select Transducer Cone and Fish Arches Fish ID+TMTo turn Fish ID+TM on or off Fish Sensitivity KHz SensitivityKHz Balance WideSide SensitivityDepth Lines To change the Depth Lines settingDepth Lines Surface Clutter To change the Surface Clutter settingSurface Clutter Noise Filter To change the Noise Filter settingTo change the Max Depth setting Max DepthTransducer Select To change the Water Type settingWater Type To change the selected TransducerNavigation Menu Tab To view the Tracks Submenu TracksTracks allows you to view the Tracks submenu Highlight Tracks on the Navigation main menuHighlight Waypoints on the Navigation main menu WaypointsTo view the Waypoints Submenu Waypoints Submenu contains the following menu choicesTo view the Routes Submenu To change the View Orientation settingRoutes Routes Submenu contains the following menu choicesTo change the Map Borders setting Chart Detail LevelTo change the Chart Detail Level setting Map BordersNorth Reference Lat/Lon GridSpot Soundings Grid RotationTrackpoint Interval To change the Trackpoint Interval settingTo change the Track Minimum Distance setting Track Min DistanceSet Map Offset Map DatumSet Simulation Position To Clear Map Offset Clear Map OffsetDelete All Nav Data To Delete All Navigation DataAlarms Menu Alarms Menu TabFrom any view, press the Menu key twice to access the Main To change the Depth Alarm setting Depth AlarmFish ID Alarm To change the Fish ID Alarm settingTo change the Low Battery Alarm setting Low Battery AlarmOff Course Alarm Highlight Low Battery Alarm on the Alarms main menuAlarm Tone Arrival AlarmDrift Alarm Setup Menu Tab Setup Menu TabUnits Distance Units DepthUnits Temp Language User ModeUnits Speed To Reset Triplog Triplog ResetRestore Defaults To Restore DefaultsSelect Views Select ViewsTo Select Views To Select Readouts Select ReadoutsAdvanced, Sonar View Only Speed Calibration Depth OffsetTemp Offset Position Format Local Time ZoneDaylight Savings Time Advanced, International Only Time FormatDate Format To change the Time FormatFollowing Nmea sentences are output Nmea OutputSonar To turn Nmea Output on or offAccessories Menu Tab Accessories Menu TabTroubleshooting Fishing System Doesn’t Power UpDisplay Problems Problem Possible CauseFinding the Cause of Noise Possible Source of Noise IsolationMatrix Fishing System Accessories Specifications Page Custserv@techsonic.com Monday Friday 800 a.m. to 430 p.m. Central Standard Time
Top Page Image Contents