Humminbird 67 manual Navigation X-PressTMMenu, Save Current Track, Clear Current Track

Page 46

Navigation X-PressTMMenu

(Navigation Views Only)

The Navigation X-PressTMmenu provides access to the settings most frequently used. Press the MENU key once while in the Bird's Eye View, the Chart or the Combo View to access the Navigation X-PressTMmenu.

NOTE: Menu choices will vary depending on system settings, such as whether you are currently navigating.

Navigation X-PressTMMenu

Save Current Track

Save Current Track allows you to save the current track being displayed.

After the current track is saved, a new current track is started.

To Save Current Track:

1.Highlight Save Current Track on the Navigation X-PressTMmenu.

2.Use the RIGHT 4-WAY Cursor Control key to initiate saving the current track.

3.The Confirm dialog box will appear. To save the current track, press the RIGHT Cursor key once more. To cancel saving the current track, press the LEFT Cursor key.

Clear Current Track

Clear Current Track allows you to clear the current track being displayed and start a new track at the present position.

To Clear Current Track:

1.Highlight Clear Current Track on the Navigation X-PressTMmenu.

2.Use the RIGHT 4-WAY Cursor Control key to initiate clearing the current track.

3.The Confirm dialog box will appear. To clear the current track, press the RIGHT Cursor key once more. To cancel clearing the current track, press the LEFT Cursor key.

40

Image 46

Contents Matrix 67GPS Trackplotter Operations Manual Thank You Table of Contents Navigation X-Press Menu Navigation Views Only Sonar X-Press Menu Sonar Views OnlySonar Menu Tab Setup Menu Tab Alarms Menu TabNavigation Menu Tab Accessories Menu Tab Troubleshooting DualBeam Plus Sonar How Sonar WorksQuadraBeam Sonar How GPS and Cartography Work WideSide SonarWith Optional-Purchase WideSide Transducer Multi-Media Card MMC Detailed MapWhat’s On the Sonar Display Bait Ball Hard Bottom Rocky Bottom83 kHz, Wide Beam Hollow Fish Symbol To your boat, including the following itemsSonar View ViewsSonar views Zoom ViewSonar View Sonar ViewUnderstanding Sonar History Real Time Sonar RTS WindowBottom Presentation Bottom Contour Profile with RTS WindowPage Sonar Zoom View Sonar Zoom View200/83 kHz Split Sonar View 200/83 kHz Split Sonar ViewBig Digits View Big Digits ViewSide Beam View Side Beam ViewWideSide View WideSide ViewBird’s Eye View Bird’s Eye ViewChart View Chart View with Active CursorViewing Cartography Combo ViewView Orientation Combo ViewPage Waypoints, Routes and Tracks Introduction to NavigationWaypoints, Routes and Tracks Save, Edit, or Delete a Waypoint Navigate to a Waypoint or Position Chart View with Grid Add a Waypoint Target or Trolling GridSave, Edit or Delete a Route Save or Clear a Current Track Edit, Delete or Hide Saved TracksView Key POWER/LIGHT KeyKey Functions Info KeyWAY Cursor Control Key Menu KeyMark Key Zoom +/- Key Goto KeyExit Key Powering Up the Unit Accessory BusMatrix 67 Title Screen Main Menu System Normal User Mode Menu SystemSonar Tab, Normal Mode Sonar Tab, Advanced Mode Normal Operation Start-Up Options MenuSimulator System Status Self Test Accessory Test GPS Diagnostic ViewAccessory Test Screen System Status Self Test ScreenPC Connect GPS Diagnostic ViewWith PC Connect Cable Only Sonar Views Only To adjust the WideSide ViewSonar X-PressTMMenu Sonar X-PressTMMenuHighlight Sensitivity on the Sonar X-PressTMmenu To adjust the SensitivitySensitivity Sensitivity at Low Sensitivity at MediumTo adjust the Upper Range Upper RangeLower Range To adjust the Lower RangeHighlight Lower Range on the Sonar X-PressTMmenu To adjust the Chart Speed Chart SpeedTo adjust the Side Beam Range Highlight Chart Speed on the Sonar X-Press menuBottom View To adjust the Bottom ViewTo adjust the Zoom Level Zoom LevelSave Current Track Navigation X-PressTMMenuClear Current Track Save Current Route Cancel NavigationSkip Next Waypoint Remove Grid Remove TargetSonar Window Sonar Menu Tab Sonar MenuTo use Beam Select Beam SelectHighlight Beam Select on the Sonar main menu To turn Fish ID+TM on or off Fish ID+TMTransducer Cone and Fish Arches Fish Sensitivity KHz SensitivityKHz Balance WideSide SensitivityDepth Lines To change the Depth Lines settingDepth Lines Surface Clutter To change the Surface Clutter settingSurface Clutter Noise Filter To change the Noise Filter settingTo change the Max Depth setting Max DepthTransducer Select To change the Water Type settingWater Type To change the selected TransducerNavigation Menu Tab To view the Tracks Submenu TracksTracks allows you to view the Tracks submenu Highlight Tracks on the Navigation main menuHighlight Waypoints on the Navigation main menu WaypointsTo view the Waypoints Submenu Waypoints Submenu contains the following menu choicesTo view the Routes Submenu To change the View Orientation settingRoutes Routes Submenu contains the following menu choicesTo change the Map Borders setting Chart Detail LevelTo change the Chart Detail Level setting Map BordersNorth Reference Lat/Lon GridSpot Soundings Grid RotationTrackpoint Interval To change the Trackpoint Interval settingTo change the Track Minimum Distance setting Track Min DistanceSet Simulation Position Map DatumSet Map Offset To Clear Map Offset Clear Map OffsetDelete All Nav Data To Delete All Navigation DataFrom any view, press the Menu key twice to access the Main Alarms Menu TabAlarms Menu To change the Depth Alarm setting Depth AlarmFish ID Alarm To change the Fish ID Alarm settingTo change the Low Battery Alarm setting Low Battery AlarmOff Course Alarm Highlight Low Battery Alarm on the Alarms main menuDrift Alarm Arrival AlarmAlarm Tone Setup Menu Tab Setup Menu TabUnits Temp Units DepthUnits Distance Units Speed User ModeLanguage To Reset Triplog Triplog ResetRestore Defaults To Restore DefaultsTo Select Views Select ViewsSelect Views Advanced, Sonar View Only Select ReadoutsTo Select Readouts Temp Offset Depth OffsetSpeed Calibration Daylight Savings Time Local Time ZonePosition Format Advanced, International Only Time FormatDate Format To change the Time FormatFollowing Nmea sentences are output Nmea OutputSonar To turn Nmea Output on or offAccessories Menu Tab Accessories Menu TabTroubleshooting Fishing System Doesn’t Power UpDisplay Problems Problem Possible CauseFinding the Cause of Noise Possible Source of Noise IsolationMatrix Fishing System Accessories Specifications Page Custserv@techsonic.com Monday Friday 800 a.m. to 430 p.m. Central Standard Time