Humminbird 67 manual Transducer Select, To change the Water Type setting

Page 57

Water Type

(Advanced)

Water Type configures your unit for operation in fresh or salt water. The Water Type menu choice is available when User Mode is set to Advanced (see Setup Menu Tab: User Mode).

NOTE: In salt water, what would be considered a large fish might be 2 to 10 times bigger than a large fish in fresh water (depending on the type of fish you are seeking). The salt water setting allows for a greater range in fish size adjustment to account for this. Also, make sure that the Water Type is set accurately, especially in salt water, as this affects the accuracy of deep water depth readings.

To change the Water Type setting:

1.Make sure you are in Advanced User Mode, then highlight Water Type on the Sonar main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Water Type setting. (Fresh, Salt, Default = Fresh)

Transducer Select

Transducer Select allows you to select which transducer you want to use (the Matrix Fishing System comes with a DualBeam PLUSTM transducer, and also supports the optional-purchase QuadraBeamTM and WideSide transducers.)

To change the selected Transducer:

1.Highlight Transducer Select on the Sonar Main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the transducer selected. (DualBeam, QuadraBeam, WideSide, Default = DualBeam)

51

Image 57

Contents Matrix 67GPS Trackplotter Operations Manual Thank You Table of Contents Sonar X-Press Menu Sonar Views Only Navigation X-Press Menu Navigation Views OnlySonar Menu Tab Alarms Menu Tab Setup Menu TabNavigation Menu Tab Accessories Menu Tab Troubleshooting How Sonar Works DualBeam Plus SonarQuadraBeam Sonar WideSide Sonar How GPS and Cartography WorkWith Optional-Purchase WideSide Transducer Detailed Map Multi-Media Card MMCBait Ball Hard Bottom Rocky Bottom What’s On the Sonar DisplayTo your boat, including the following items 83 kHz, Wide Beam Hollow Fish SymbolSonar views ViewsSonar View Zoom ViewSonar View Sonar ViewReal Time Sonar RTS Window Understanding Sonar HistoryBottom Contour Profile with RTS Window Bottom PresentationPage Sonar Zoom View Sonar Zoom ViewBig Digits View 200/83 kHz Split Sonar View200/83 kHz Split Sonar View Big Digits ViewSide Beam View Side Beam ViewWideSide View WideSide ViewBird’s Eye View Bird’s Eye ViewChart View with Active Cursor Chart ViewView Orientation Combo ViewViewing Cartography Combo ViewPage Introduction to Navigation Waypoints, Routes and TracksWaypoints, Routes and Tracks Save, Edit, or Delete a Waypoint Navigate to a Waypoint or Position Add a Waypoint Target or Trolling Grid Chart View with GridSave, Edit or Delete a Route Edit, Delete or Hide Saved Tracks Save or Clear a Current TrackKey Functions POWER/LIGHT KeyView Key Info KeyMenu Key WAY Cursor Control KeyMark Key Goto Key Zoom +/- KeyExit Key Accessory Bus Powering Up the UnitMatrix 67 Title Screen Menu System Main Menu System Normal User ModeSonar Tab, Normal Mode Sonar Tab, Advanced Mode Start-Up Options Menu Normal OperationSimulator Accessory Test Screen Self Test Accessory Test GPS Diagnostic ViewSystem Status System Status Self Test ScreenGPS Diagnostic View PC ConnectWith PC Connect Cable Only Sonar X-PressTMMenu To adjust the WideSide ViewSonar Views Only Sonar X-PressTMMenuSensitivity To adjust the SensitivityHighlight Sensitivity on the Sonar X-PressTMmenu Sensitivity at Low Sensitivity at MediumUpper Range To adjust the Upper RangeTo adjust the Lower Range Lower RangeHighlight Lower Range on the Sonar X-PressTMmenu To adjust the Side Beam Range Chart SpeedTo adjust the Chart Speed Highlight Chart Speed on the Sonar X-Press menuTo adjust the Zoom Level To adjust the Bottom ViewBottom View Zoom LevelNavigation X-PressTMMenu Save Current TrackClear Current Track Cancel Navigation Save Current RouteSkip Next Waypoint Remove Target Remove GridSonar Window Sonar Menu Sonar Menu TabBeam Select To use Beam SelectHighlight Beam Select on the Sonar main menu Fish ID+TM To turn Fish ID+TM on or offTransducer Cone and Fish Arches KHz Sensitivity Fish SensitivityWideSide Sensitivity KHz BalanceTo change the Depth Lines setting Depth LinesDepth Lines To change the Surface Clutter setting Surface ClutterSurface Clutter To change the Max Depth setting To change the Noise Filter settingNoise Filter Max DepthWater Type To change the Water Type settingTransducer Select To change the selected TransducerNavigation Menu Tab Tracks allows you to view the Tracks submenu TracksTo view the Tracks Submenu Highlight Tracks on the Navigation main menuTo view the Waypoints Submenu WaypointsHighlight Waypoints on the Navigation main menu Waypoints Submenu contains the following menu choicesRoutes To change the View Orientation settingTo view the Routes Submenu Routes Submenu contains the following menu choicesTo change the Chart Detail Level setting Chart Detail LevelTo change the Map Borders setting Map BordersSpot Soundings Lat/Lon GridNorth Reference Grid RotationTo change the Track Minimum Distance setting To change the Trackpoint Interval settingTrackpoint Interval Track Min DistanceMap Datum Set Simulation PositionSet Map Offset Delete All Nav Data Clear Map OffsetTo Clear Map Offset To Delete All Navigation DataAlarms Menu Tab From any view, press the Menu key twice to access the MainAlarms Menu Fish ID Alarm Depth AlarmTo change the Depth Alarm setting To change the Fish ID Alarm settingOff Course Alarm Low Battery AlarmTo change the Low Battery Alarm setting Highlight Low Battery Alarm on the Alarms main menuArrival Alarm Drift AlarmAlarm Tone Setup Menu Tab Setup Menu TabUnits Depth Units TempUnits Distance User Mode Units SpeedLanguage Restore Defaults Triplog ResetTo Reset Triplog To Restore DefaultsSelect Views To Select ViewsSelect Views Select Readouts Advanced, Sonar View OnlyTo Select Readouts Depth Offset Temp OffsetSpeed Calibration Local Time Zone Daylight Savings TimePosition Format Date Format Time FormatAdvanced, International Only To change the Time FormatSonar Nmea OutputFollowing Nmea sentences are output To turn Nmea Output on or offAccessories Menu Tab Accessories Menu TabFishing System Doesn’t Power Up TroubleshootingProblem Possible Cause Display ProblemsPossible Source of Noise Isolation Finding the Cause of NoiseMatrix Fishing System Accessories Specifications Page Monday Friday 800 a.m. to 430 p.m. Central Standard Time Custserv@techsonic.com