Humminbird 67 manual Date Format, Advanced, International Only, To change the Time Format

Page 79

Time Format

(Advanced, International Only)

Time Format changes the time format used by the unit This menu choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode.) International Models Only. Time Format selects a 12 hour or 24 hour format for the time of day displayed when Time + Date is selected as a Digital Readout on the Sonar View (see Select Readouts).

To change the Time Format:

1.Make sure you are in Advanced User Mode, then highlight Time Format on the Setup menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Time Format. (12 hour, 24 hour, Default = 12 hour)

Date Format

(Advanced, International Only)

Date Format changes the date format used by the unit This menu choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode.) International Models Only. Date Format selects the format for the date display when Time + Date is selected as a Digital Readout on the Sonar View. (see Select Readouts).

To change the Date Format:

1.Make sure you are in Advanced User Mode, then highlight Date Format on the Setup menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Date Format. (mm/dd/yy, dd.mm.yy or yy.mm.dd, Default = mm/dd/yy)

73

Image 79

Contents Matrix 67GPS Trackplotter Operations Manual Thank You Table of Contents Navigation X-Press Menu Navigation Views Only Sonar X-Press Menu Sonar Views OnlySonar Menu Tab Setup Menu Tab Alarms Menu TabNavigation Menu Tab Accessories Menu Tab Troubleshooting DualBeam Plus Sonar How Sonar WorksQuadraBeam Sonar How GPS and Cartography Work WideSide SonarWith Optional-Purchase WideSide Transducer Detailed Map Multi-Media Card MMCBait Ball Hard Bottom Rocky Bottom What’s On the Sonar DisplayTo your boat, including the following items 83 kHz, Wide Beam Hollow Fish SymbolZoom View ViewsSonar views Sonar ViewSonar View Sonar ViewReal Time Sonar RTS Window Understanding Sonar HistoryBottom Contour Profile with RTS Window Bottom PresentationPage Sonar Zoom View Sonar Zoom ViewBig Digits View 200/83 kHz Split Sonar ViewBig Digits View 200/83 kHz Split Sonar ViewSide Beam View Side Beam ViewWideSide View WideSide ViewBird’s Eye View Bird’s Eye ViewChart View with Active Cursor Chart ViewCombo View Combo ViewView Orientation Viewing CartographyPage Waypoints, Routes and Tracks Introduction to NavigationWaypoints, Routes and Tracks Save, Edit, or Delete a Waypoint Navigate to a Waypoint or Position Add a Waypoint Target or Trolling Grid Chart View with GridSave, Edit or Delete a Route Edit, Delete or Hide Saved Tracks Save or Clear a Current TrackInfo Key POWER/LIGHT KeyKey Functions View KeyWAY Cursor Control Key Menu KeyMark Key Zoom +/- Key Goto KeyExit Key Powering Up the Unit Accessory BusMatrix 67 Title Screen Menu System Main Menu System Normal User ModeSonar Tab, Normal Mode Sonar Tab, Advanced Mode Normal Operation Start-Up Options MenuSimulator System Status Self Test Screen Self Test Accessory Test GPS Diagnostic ViewAccessory Test Screen System StatusPC Connect GPS Diagnostic ViewWith PC Connect Cable Only Sonar X-PressTMMenu To adjust the WideSide ViewSonar X-PressTMMenu Sonar Views OnlySensitivity at Low Sensitivity at Medium To adjust the SensitivitySensitivity Highlight Sensitivity on the Sonar X-PressTMmenuUpper Range To adjust the Upper RangeLower Range To adjust the Lower RangeHighlight Lower Range on the Sonar X-PressTMmenu Highlight Chart Speed on the Sonar X-Press menu Chart SpeedTo adjust the Side Beam Range To adjust the Chart SpeedZoom Level To adjust the Bottom ViewTo adjust the Zoom Level Bottom ViewSave Current Track Navigation X-PressTMMenuClear Current Track Save Current Route Cancel NavigationSkip Next Waypoint Remove Grid Remove TargetSonar Window Sonar Menu Sonar Menu TabTo use Beam Select Beam SelectHighlight Beam Select on the Sonar main menu To turn Fish ID+TM on or off Fish ID+TMTransducer Cone and Fish Arches KHz Sensitivity Fish SensitivityWideSide Sensitivity KHz BalanceDepth Lines To change the Depth Lines settingDepth Lines Surface Clutter To change the Surface Clutter settingSurface Clutter Max Depth To change the Noise Filter settingTo change the Max Depth setting Noise FilterTo change the selected Transducer To change the Water Type settingWater Type Transducer SelectNavigation Menu Tab Highlight Tracks on the Navigation main menu TracksTracks allows you to view the Tracks submenu To view the Tracks SubmenuWaypoints Submenu contains the following menu choices WaypointsTo view the Waypoints Submenu Highlight Waypoints on the Navigation main menuRoutes Submenu contains the following menu choices To change the View Orientation settingRoutes To view the Routes SubmenuMap Borders Chart Detail LevelTo change the Chart Detail Level setting To change the Map Borders settingGrid Rotation Lat/Lon GridSpot Soundings North ReferenceTrack Min Distance To change the Trackpoint Interval settingTo change the Track Minimum Distance setting Trackpoint IntervalSet Simulation Position Map DatumSet Map Offset To Delete All Navigation Data Clear Map OffsetDelete All Nav Data To Clear Map OffsetFrom any view, press the Menu key twice to access the Main Alarms Menu TabAlarms Menu To change the Fish ID Alarm setting Depth AlarmFish ID Alarm To change the Depth Alarm settingHighlight Low Battery Alarm on the Alarms main menu Low Battery AlarmOff Course Alarm To change the Low Battery Alarm settingDrift Alarm Arrival AlarmAlarm Tone Setup Menu Tab Setup Menu TabUnits Temp Units DepthUnits Distance Units Speed User ModeLanguage To Restore Defaults Triplog ResetRestore Defaults To Reset TriplogTo Select Views Select ViewsSelect Views Advanced, Sonar View Only Select ReadoutsTo Select Readouts Temp Offset Depth OffsetSpeed Calibration Daylight Savings Time Local Time ZonePosition Format To change the Time Format Time FormatDate Format Advanced, International OnlyTo turn Nmea Output on or off Nmea OutputSonar Following Nmea sentences are outputAccessories Menu Tab Accessories Menu TabFishing System Doesn’t Power Up TroubleshootingProblem Possible Cause Display ProblemsPossible Source of Noise Isolation Finding the Cause of NoiseMatrix Fishing System Accessories Specifications Page Monday Friday 800 a.m. to 430 p.m. Central Standard Time Custserv@techsonic.com