Humminbird 67 manual With PC Connect Cable Only, GPS Diagnostic View

Page 39

This view also reports the current position, local time and date, and other numeric information. The current GPS Fix Type is reported as No Fix, 2D Fix, 3D Fix, or Enhanced. An Enhanced fix has been augmented using information from WAAS, EGNOS, or MSAS. A 3D or Enhanced Fix is required for navigation. HDOP (the Horizontal Dilution of Precision) is a GPS system parameter which depends on the current satellite configuration. HDOP is used to calculate the Estimated Position Error.

GPS Diagnostic View

Sky Chart

Satellite Being

Monitored

Current Latitude

and Longitude

PC Connect

(With PC Connect Cable Only)

Satellite Being Used

Use PC Connect to update the software of the Matrix Fishing System control head. This feature requires the use of the PC Connect Cable. Complete instructions are included with the PC Connect Cable accessory.

NOTE: The PC Connect Cable requires a separate purchase. For more information visit our website at www.humminbird.com or contact our Customer Resource Center at 1-334-687-0503.

Exit PC Connect mode by powering the Matrix Fishing System off.

33

Image 39

Contents Matrix 67GPS Trackplotter Operations Manual Thank You Table of Contents Sonar X-Press Menu Sonar Views Only Navigation X-Press Menu Navigation Views OnlySonar Menu Tab Alarms Menu Tab Setup Menu TabNavigation Menu Tab Accessories Menu Tab Troubleshooting How Sonar Works DualBeam Plus SonarQuadraBeam Sonar WideSide Sonar How GPS and Cartography WorkWith Optional-Purchase WideSide Transducer Detailed Map Multi-Media Card MMCBait Ball Hard Bottom Rocky Bottom What’s On the Sonar DisplayTo your boat, including the following items 83 kHz, Wide Beam Hollow Fish SymbolZoom View ViewsSonar views Sonar ViewSonar View Sonar ViewReal Time Sonar RTS Window Understanding Sonar HistoryBottom Contour Profile with RTS Window Bottom PresentationPage Sonar Zoom View Sonar Zoom ViewBig Digits View 200/83 kHz Split Sonar ViewBig Digits View 200/83 kHz Split Sonar ViewSide Beam View Side Beam ViewWideSide View WideSide ViewBird’s Eye View Bird’s Eye ViewChart View with Active Cursor Chart ViewCombo View Combo ViewView Orientation Viewing CartographyPage Introduction to Navigation Waypoints, Routes and TracksWaypoints, Routes and Tracks Save, Edit, or Delete a Waypoint Navigate to a Waypoint or Position Add a Waypoint Target or Trolling Grid Chart View with GridSave, Edit or Delete a Route Edit, Delete or Hide Saved Tracks Save or Clear a Current TrackInfo Key POWER/LIGHT KeyKey Functions View KeyMenu Key WAY Cursor Control KeyMark Key Goto Key Zoom +/- KeyExit Key Accessory Bus Powering Up the UnitMatrix 67 Title Screen Menu System Main Menu System Normal User ModeSonar Tab, Normal Mode Sonar Tab, Advanced Mode Start-Up Options Menu Normal OperationSimulator System Status Self Test Screen Self Test Accessory Test GPS Diagnostic ViewAccessory Test Screen System StatusGPS Diagnostic View PC ConnectWith PC Connect Cable Only Sonar X-PressTMMenu To adjust the WideSide ViewSonar X-PressTMMenu Sonar Views OnlySensitivity at Low Sensitivity at Medium To adjust the SensitivitySensitivity Highlight Sensitivity on the Sonar X-PressTMmenuUpper Range To adjust the Upper RangeTo adjust the Lower Range Lower RangeHighlight Lower Range on the Sonar X-PressTMmenu Highlight Chart Speed on the Sonar X-Press menu Chart SpeedTo adjust the Side Beam Range To adjust the Chart SpeedZoom Level To adjust the Bottom ViewTo adjust the Zoom Level Bottom ViewNavigation X-PressTMMenu Save Current TrackClear Current Track Cancel Navigation Save Current RouteSkip Next Waypoint Remove Target Remove GridSonar Window Sonar Menu Sonar Menu TabBeam Select To use Beam SelectHighlight Beam Select on the Sonar main menu Fish ID+TM To turn Fish ID+TM on or offTransducer Cone and Fish Arches KHz Sensitivity Fish SensitivityWideSide Sensitivity KHz BalanceTo change the Depth Lines setting Depth LinesDepth Lines To change the Surface Clutter setting Surface ClutterSurface Clutter Max Depth To change the Noise Filter settingTo change the Max Depth setting Noise FilterTo change the selected Transducer To change the Water Type settingWater Type Transducer SelectNavigation Menu Tab Highlight Tracks on the Navigation main menu TracksTracks allows you to view the Tracks submenu To view the Tracks SubmenuWaypoints Submenu contains the following menu choices WaypointsTo view the Waypoints Submenu Highlight Waypoints on the Navigation main menuRoutes Submenu contains the following menu choices To change the View Orientation settingRoutes To view the Routes SubmenuMap Borders Chart Detail LevelTo change the Chart Detail Level setting To change the Map Borders settingGrid Rotation Lat/Lon GridSpot Soundings North ReferenceTrack Min Distance To change the Trackpoint Interval settingTo change the Track Minimum Distance setting Trackpoint IntervalMap Datum Set Simulation PositionSet Map Offset To Delete All Navigation Data Clear Map OffsetDelete All Nav Data To Clear Map OffsetAlarms Menu Tab From any view, press the Menu key twice to access the MainAlarms Menu To change the Fish ID Alarm setting Depth AlarmFish ID Alarm To change the Depth Alarm settingHighlight Low Battery Alarm on the Alarms main menu Low Battery AlarmOff Course Alarm To change the Low Battery Alarm settingArrival Alarm Drift AlarmAlarm Tone Setup Menu Tab Setup Menu TabUnits Depth Units TempUnits Distance User Mode Units SpeedLanguage To Restore Defaults Triplog ResetRestore Defaults To Reset TriplogSelect Views To Select ViewsSelect Views Select Readouts Advanced, Sonar View OnlyTo Select Readouts Depth Offset Temp OffsetSpeed Calibration Local Time Zone Daylight Savings TimePosition Format To change the Time Format Time FormatDate Format Advanced, International OnlyTo turn Nmea Output on or off Nmea OutputSonar Following Nmea sentences are outputAccessories Menu Tab Accessories Menu TabFishing System Doesn’t Power Up TroubleshootingProblem Possible Cause Display ProblemsPossible Source of Noise Isolation Finding the Cause of NoiseMatrix Fishing System Accessories Specifications Page Monday Friday 800 a.m. to 430 p.m. Central Standard Time Custserv@techsonic.com