Humminbird 67 manual Fish ID Alarm, To change the Depth Alarm setting

Page 68

Depth Alarm

Depth Alarm sounds when the depth becomes equal to or less than the menu setting.

To change the Depth Alarm setting:

1.Highlight Depth Alarm on the Alarms main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Depth Alarm setting. (OFF, 1 to 100 feet, or 0.5 to 30 meters [International Models Only], Default = OFF)

Fish ID Alarm

Fish ID Alarm sounds when the Matrix Fishing System detects fish that correspond to the alarm setting. Fish ID Alarm will only sound if Fish ID+TM is on.

For example, if you've set the Fish ID Alarm to sound for Large fish only, the Fish ID alarm will sound when a large-sized fish is detected.

To change the Fish ID Alarm setting:

1.Highlight Fish ID Alarm on the Alarms main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Fish ID Alarm setting. (Off, All, Large/Medium, Large, Default = Off)

All

Large/Medium

Large

Image 68

Contents Matrix 67GPS Trackplotter Operations Manual Thank You Table of Contents Sonar Menu Tab Sonar X-Press Menu Sonar Views OnlyNavigation X-Press Menu Navigation Views Only Navigation Menu Tab Alarms Menu TabSetup Menu Tab Accessories Menu Tab Troubleshooting QuadraBeam Sonar How Sonar WorksDualBeam Plus Sonar With Optional-Purchase WideSide Transducer WideSide SonarHow GPS and Cartography Work Multi-Media Card MMC Detailed MapWhat’s On the Sonar Display Bait Ball Hard Bottom Rocky Bottom83 kHz, Wide Beam Hollow Fish Symbol To your boat, including the following itemsViews Sonar viewsSonar View Zoom ViewSonar View Sonar ViewUnderstanding Sonar History Real Time Sonar RTS WindowBottom Presentation Bottom Contour Profile with RTS WindowPage Sonar Zoom View Sonar Zoom View200/83 kHz Split Sonar View Big Digits View200/83 kHz Split Sonar View Big Digits ViewSide Beam View Side Beam ViewWideSide View WideSide ViewBird’s Eye View Bird’s Eye ViewChart View Chart View with Active CursorCombo View View OrientationViewing Cartography Combo ViewPage Waypoints, Routes and Tracks Introduction to NavigationWaypoints, Routes and Tracks Save, Edit, or Delete a Waypoint Navigate to a Waypoint or Position Chart View with Grid Add a Waypoint Target or Trolling GridSave, Edit or Delete a Route Save or Clear a Current Track Edit, Delete or Hide Saved TracksPOWER/LIGHT Key Key FunctionsView Key Info KeyMark Key Menu KeyWAY Cursor Control Key Exit Key Goto KeyZoom +/- Key Matrix 67 Title Screen Accessory BusPowering Up the Unit Main Menu System Normal User Mode Menu SystemSonar Tab, Normal Mode Sonar Tab, Advanced Mode Simulator Start-Up Options MenuNormal Operation Self Test Accessory Test GPS Diagnostic View Accessory Test ScreenSystem Status System Status Self Test ScreenWith PC Connect Cable Only GPS Diagnostic ViewPC Connect To adjust the WideSide View Sonar X-PressTMMenuSonar Views Only Sonar X-PressTMMenuTo adjust the Sensitivity SensitivityHighlight Sensitivity on the Sonar X-PressTMmenu Sensitivity at Low Sensitivity at MediumTo adjust the Upper Range Upper RangeHighlight Lower Range on the Sonar X-PressTMmenu To adjust the Lower RangeLower Range Chart Speed To adjust the Side Beam RangeTo adjust the Chart Speed Highlight Chart Speed on the Sonar X-Press menuTo adjust the Bottom View To adjust the Zoom LevelBottom View Zoom LevelClear Current Track Navigation X-PressTMMenuSave Current Track Skip Next Waypoint Cancel NavigationSave Current Route Sonar Window Remove TargetRemove Grid Sonar Menu Tab Sonar MenuHighlight Beam Select on the Sonar main menu Beam SelectTo use Beam Select Transducer Cone and Fish Arches Fish ID+TMTo turn Fish ID+TM on or off Fish Sensitivity KHz SensitivityKHz Balance WideSide SensitivityDepth Lines To change the Depth Lines settingDepth Lines Surface Clutter To change the Surface Clutter settingSurface Clutter To change the Noise Filter setting To change the Max Depth settingNoise Filter Max DepthTo change the Water Type setting Water TypeTransducer Select To change the selected TransducerNavigation Menu Tab Tracks Tracks allows you to view the Tracks submenuTo view the Tracks Submenu Highlight Tracks on the Navigation main menuWaypoints To view the Waypoints SubmenuHighlight Waypoints on the Navigation main menu Waypoints Submenu contains the following menu choicesTo change the View Orientation setting RoutesTo view the Routes Submenu Routes Submenu contains the following menu choicesChart Detail Level To change the Chart Detail Level settingTo change the Map Borders setting Map BordersLat/Lon Grid Spot SoundingsNorth Reference Grid RotationTo change the Trackpoint Interval setting To change the Track Minimum Distance settingTrackpoint Interval Track Min DistanceSet Map Offset Map DatumSet Simulation Position Clear Map Offset Delete All Nav DataTo Clear Map Offset To Delete All Navigation DataAlarms Menu Alarms Menu TabFrom any view, press the Menu key twice to access the Main Depth Alarm Fish ID AlarmTo change the Depth Alarm setting To change the Fish ID Alarm settingLow Battery Alarm Off Course AlarmTo change the Low Battery Alarm setting Highlight Low Battery Alarm on the Alarms main menuAlarm Tone Arrival AlarmDrift Alarm Setup Menu Tab Setup Menu TabUnits Distance Units DepthUnits Temp Language User ModeUnits Speed Triplog Reset Restore DefaultsTo Reset Triplog To Restore DefaultsSelect Views Select ViewsTo Select Views To Select Readouts Select ReadoutsAdvanced, Sonar View Only Speed Calibration Depth OffsetTemp Offset Position Format Local Time ZoneDaylight Savings Time Time Format Date FormatAdvanced, International Only To change the Time FormatNmea Output SonarFollowing Nmea sentences are output To turn Nmea Output on or offAccessories Menu Tab Accessories Menu TabTroubleshooting Fishing System Doesn’t Power UpDisplay Problems Problem Possible CauseFinding the Cause of Noise Possible Source of Noise IsolationMatrix Fishing System Accessories Specifications Page Custserv@techsonic.com Monday Friday 800 a.m. to 430 p.m. Central Standard Time