Humminbird 595C manual Alarms Menu Tab, Depth Alarm, Fish ID Alarm, Low Battery Alarm

Page 31

FF595_Man_531385-1_A_PrfE.qxd 12/9/2004 2:41 PM Page 60

Alarms Menu Tab

From any view, press the MENU key twice to access the Main

Menu System. The Alarms tab will be the default selection.

NOTE: When an alarm is triggered, you can silence it by pressing any key. The alarm will be silenced, and will not be triggered again until a new instance of the alarm condition is detected.

Alarms Menu

Depth Alarm

Depth Alarm sounds when the depth becomes equal to or less than the menu setting.

To change the Depth Alarm setting:

1.Highlight Depth Alarm on the Alarms main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Depth Alarm setting. (OFF, 1 to 100 feet, or 0.5 to 30 meters [International Models Only], Default = OFF)

Fish ID Alarm

Fish ID Alarm sounds when the FishFinder detects fish that

correspond to the alarm setting. Fish ID Alarm will only sound if Fish ID+™ is on.

For example, if you've set the Fish ID Alarm to sound for Large fish only, the Fish ID alarm will sound when a large-sized fish is detected.

To change the Fish ID Alarm setting:

1.Highlight Fish ID Alarm on the Alarms main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Fish ID Alarm setting. (Off, All, Large/Medium, Large, Default = Off)

All

Large/Medium

Large

Low Battery Alarm

Low Battery Alarm sounds when the input battery voltage is equal to or less than the menu setting. The battery alarm will only sound for the battery that is connected to the FishFinder. The Low Battery Alarm should be set to warn you when the battery voltage drops below the safety margin that you have determined. For instance, if you are running a trolling motor (battery operated), you would want to set the Low Battery Alarm to sound before the battery voltage drops too low for it to be used to start your main, gasoline-powered engine.

To change the Low Battery Alarm setting:

1.Highlight Low Battery Alarm on the Alarms main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Low Battery Alarm setting. (Off, 9.0V - 13.5V, Default = Off)

54

55

Image 31

Contents FishFinder 595c Operations Manual Thank You Table of ContentsSonar X-Press Menu Sonar Views Only Powering Up the Unit Menu System Start-Up Options MenuAlarms Menu Tab Setup Menu TabHow Sonar Works Views Menu Tab TroubleshootingSingle Beam Sonar Multi-Media Card MMC How GPS and Cartography WorkRTS Real Time Sonar Window Low Sonar Intensity Return KHz Fish SymbolWhat’s On the Sonar Display High Sonar Intensity Return Bait BallSonar views Sonar Zoom View Chart View Big Digits ViewViews Sonar ViewReal Time Sonar RTS Window Understanding Sonar HistoryBottom Presentation Big Digits View Sonar Zoom ViewBig Digits View Bird’s Eye View Chart ViewChart View with Active Cursor Bird’s Eye ViewView Orientation Combo ViewViewing Cartography Waypoints, Routes and Tracks Introduction to NavigationWaypoints, Routes and Tracks Save, Edit, or Delete a WaypointAdd a Waypoint Target or Trolling Grid Chart View with TargetNavigate to a Waypoint or Position Save, Edit or Delete a Route Chart View with GridSave or Clear a Current Track View Key POWER/LIGHT KeyEdit, Delete or Hide Saved Tracks Key FunctionsZoom +/- Key WAY Cursor Control KeyMark Key Goto KeyMenu System Powering Up the UnitMain Menu System Normal User Mode Sonar Tab, Normal Mode Sonar Tab, Advanced ModeSystem Status Start-Up Options MenuNormal Operation SimulatorSonar Views Only Position ErrorGPS Diagnostic View Sonar X-Press MenuUpper Range To adjust the SensitivityTo adjust the Upper Range SensitivityLower Range Chart SpeedBottom View Save Current Route Navigation X-Press MenuSave Current Track Clear Current TrackRemove Grid Cancel NavigationSkip Next Waypoint Remove TargetFish ID+ Sonar Menu TabTo turn Fish ID+ on or off Depth Lines Fish SensitivityAdvanced Water Type Surface ClutterNoise Filter Max DepthTracks Submenu contains the following menu choices Navigation Menu TabTracks WaypointsRoutes Chart Detail LevelMap Borders North Reference Lat/Lon GridSpot Soundings Shaded DepthClear Map Offset Map DatumSet Simulation Position Set Map OffsetLow Battery Alarm Alarms Menu TabDepth Alarm Fish ID AlarmDrift Alarm Temp AlarmOff Course Alarm Arrival AlarmSetup tab is selected Alarm ToneSetup Menu Tab To change the Alarm Tone settingUnits Temp User ModeUnits Depth Units SpeedAdvanced, Sonar View Only Triplog ResetRestore Defaults Select ReadoutsLocal Time Zone Depth OffsetTemp Offset Speed CalibrationSonar Time FormatDate Format Nmea OutputViews Menu Tab TroubleshootingFishFinder Doesn’t Power Up FishFinder Defaults to Simulator with a Transducer AttachedIsolation Display ProblemsProblem Possible Cause Finding the Cause of NoiseSpecifications Humminbird FishFinder AccessoriesContact Humminbird