Humminbird 595C manual Lat/Lon Grid, Spot Soundings, Shaded Depth, North Reference, Grid Rotation

Page 29

FF595_Man_531385-1_A_PrfE.qxd 12/9/2004 2:41 PM Page 56

Lat/Lon Grid

Lat/Lon Grid allows you to display or hide a grid showing latitude and longitude lines.

To change the Lat/Lon Grid setting:

1.Highlight Lat/Lon Grid on the Navigation main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Lat/Lon Grid setting. (Hidden, Visible, Default = Hidden)

Spot Soundings

Spot Soundings allows you to display or hide spot soundings, which are depth measurements shown on the chart.

NOTE: Spot Soundings are only available on optional-purchase MMC charts.

To change the Spot Soundings setting:

1.Highlight Spot Soundings on the Navigation main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Spot Soundings setting. (Hidden, Visible, Default = Hidden)

Shaded Depth

Shaded Depth allows you to change the depth used for shading on the chart views.

To change the Shaded Depth setting:

1.Highlight Shaded Depth on the Navigation main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Shaded Depth setting. (Off, 1 to 60 Feet, Default = 16 Feet)

North Reference

North Reference allows you to have bearings displayed with one of two orientations: True North or Magnetic North.

To change the North Reference setting:

1.Highlight North Reference on the Navigation main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the North Reference setting. (True, Magnetic, Default = True)

Grid Rotation

Grid Rotation allows you to set the orientation of the trolling grid in degrees, where a setting of 0° displays a standard North, South, East, West alignment. See Waypoints for information on how to set a Grid.

To change the Grid Rotation setting:

1.Highlight Grid Rotation on the Navigation main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Grid Rotation setting. (0° to 89°, Default = 0°)

Trackpoint Interval

Trackpoint Interval allows you to select the time period between trackpoints. The current track can only contain up to 2000 trackpoints, so longer time periods cause the track to extend back further in time, but will be less detailed.

NOTE: Trackpoint Interval works in conjunction with Track Min Distance. Both conditions must be met before a trackpoint is added to the current track.

To change the Trackpoint Interval setting:

1.Highlight Trackpoint Interval on the Navigation main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Trackpoint Interval setting. (1 second, 5 seconds, 10 seconds, 15 seconds, 30 seconds or 60 seconds, Default = 15 seconds)

NOTE: During slow travel or drift, setting both Trackpoint Interval and Track Min Distance to small values will allow you to increase the track resolution.

Track Min Distance

(Advanced)

Track Min Distance allows you to set a minimum distance of travel before a trackpoint is added to the track.

NOTE: Track Min Distance works in conjunction with Trackpoint Interval. Both conditions must be met before a trackpoint is added to the current track.

To change the Track Minimum Distance setting:

1.Make sure you are in Advanced User Mode, then highlight Track Min Distance on the Navigation main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Track Min Distance setting. (1 to 300 feet or 1 to 100 meters [International Units Only], Default = 16 ft, 5 m)

NOTE: During slow travel or drift, setting both Trackpoint Interval and Track Min Distance to small values will allow you to increase the track resolution.

50

51

Page 28 Page 30
Image 29
Page 28 Page 30
Contents FishFinder 595c Operations Manual Thank You Table of ContentsAlarms Menu Tab Powering Up the Unit Menu System Start-Up Options MenuSetup Menu Tab Sonar X-Press Menu Sonar Views OnlySingle Beam Sonar Views Menu Tab TroubleshootingHow Sonar Works Multi-Media Card MMC How GPS and Cartography WorkWhat’s On the Sonar Display KHz Fish SymbolHigh Sonar Intensity Return Bait Ball RTS Real Time Sonar Window Low Sonar Intensity ReturnViews Sonar Zoom View Chart View Big Digits ViewSonar View Sonar viewsBottom Presentation Understanding Sonar HistoryReal Time Sonar RTS Window Big Digits View Sonar Zoom ViewBig Digits View Chart View with Active Cursor Chart ViewBird’s Eye View Bird’s Eye ViewViewing Cartography Combo ViewView Orientation Waypoints, Routes and Tracks Introduction to NavigationSave, Edit, or Delete a Waypoint Waypoints, Routes and TracksNavigate to a Waypoint or Position Chart View with TargetAdd a Waypoint Target or Trolling Grid Save or Clear a Current Track Chart View with GridSave, Edit or Delete a Route Edit, Delete or Hide Saved Tracks POWER/LIGHT KeyKey Functions View KeyMark Key WAY Cursor Control KeyGoto Key Zoom +/- KeyMain Menu System Normal User Mode Powering Up the UnitSonar Tab, Normal Mode Sonar Tab, Advanced Mode Menu SystemNormal Operation Start-Up Options MenuSimulator System StatusGPS Diagnostic View Position ErrorSonar X-Press Menu Sonar Views OnlyTo adjust the Upper Range To adjust the SensitivitySensitivity Upper RangeBottom View Chart SpeedLower Range Save Current Track Navigation X-Press MenuClear Current Track Save Current RouteSkip Next Waypoint Cancel NavigationRemove Target Remove GridTo turn Fish ID+ on or off Sonar Menu TabFish ID+ Advanced Fish SensitivityDepth Lines Noise Filter Surface ClutterMax Depth Water TypeTracks Navigation Menu TabWaypoints Tracks Submenu contains the following menu choicesMap Borders Chart Detail LevelRoutes Spot Soundings Lat/Lon GridShaded Depth North ReferenceSet Simulation Position Map DatumSet Map Offset Clear Map OffsetDepth Alarm Alarms Menu TabFish ID Alarm Low Battery AlarmOff Course Alarm Temp AlarmArrival Alarm Drift AlarmSetup Menu Tab Alarm ToneTo change the Alarm Tone setting Setup tab is selectedUnits Depth User ModeUnits Speed Units TempRestore Defaults Triplog ResetSelect Readouts Advanced, Sonar View OnlyTemp Offset Depth OffsetSpeed Calibration Local Time ZoneDate Format Time FormatNmea Output SonarFishFinder Doesn’t Power Up TroubleshootingFishFinder Defaults to Simulator with a Transducer Attached Views Menu TabProblem Possible Cause Display ProblemsFinding the Cause of Noise IsolationSpecifications Humminbird FishFinder AccessoriesContact Humminbird
Top Page Image Contents