Humminbird 595C manual Temp Alarm, Off Course Alarm, Arrival Alarm, Drift Alarm

Page 32

FF595_Man_531385-1_A_PrfE.qxd 12/9/2004 2:41 PM Page 62

Temp Alarm

Temp Alarm sounds when the water temperature detected by the FishFinder reaches the Temp Alarm setting, which is either set in degrees Fahrenheit or Celsius [International Models Only]. For example, if the Temp Alarm is set to 58 degrees Fahrenheit, and the water temperature falls from 60 degrees to 58 degrees, the Temp Alarm will sound. Similarly, if the water temperature rises from 56 degrees to 58 degrees, the Temp Alarm will also sound.

To change the Temp Alarm setting:

1.Highlight Temp Alarm on the Alarms main menu.

2.Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Temp Alarm setting. (Off, 32-120 [Fahrenheit], 0-50 [Celsius [International Models Only]], Default = Off)

Off Course Alarm

Off Course Alarm sounds when the boat has moved too far off course based on the menu setting when navigating. Off Course Alarm allows you to set how far the boat is allowed to move off course before the Off Course Alarm will sound.

Off Course

Limits

Arrival Alarm

Circle

To change the Off Course Alarm setting:

1.Highlight Off Course Alarm on the Alarms main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Off Course Alarm setting. (Off, 30 to 3000 feet, 10 to 1000 meters [International Models Only], Default = 300 ft, 100 m)

Arrival Alarm

Arrival Alarm sounds when the boat has either exceeded the distance to the destination waypoint, or has entered the Arrival Alarm Circle, based on the menu setting when navigating. Arrival Alarm allows you to set how close the boat must be to the destination waypoint before the Arrival Alarm will sound.

To change the Arrival Alarm setting:

1.Highlight Arrival Alarm on the Alarms main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Arrival Alarm setting. (Off, 30 to 3000 feet, 10 to 1000 meters [International Models Only], Default = 150 ft, 50 m)

Drift Alarm

Drift Alarm sounds when the boat has exceeded the distance from the boat’s anchored position, based on the menu setting. Drift Alarm allows you to set the size of a perimeter around the boat’s anchored position; if the anchored boat drifts outside of that perimeter, the Drift Alarm will sound.

Drift Alarm Circle

To change the Drift Alarm setting:

1.Highlight Drift Alarm on the Alarms main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Drift Alarm setting. (Off, 30 to 3000 feet, 10 to 1000 meters [International Models Only], Default = Off)

56

57

Page 31 Page 33
Image 32
Page 31 Page 33
Contents FishFinder 595c Operations Manual Table of Contents Thank YouPowering Up the Unit Menu System Start-Up Options Menu Alarms Menu TabSetup Menu Tab Sonar X-Press Menu Sonar Views OnlySingle Beam Sonar Views Menu Tab TroubleshootingHow Sonar Works How GPS and Cartography Work Multi-Media Card MMCKHz Fish Symbol What’s On the Sonar DisplayHigh Sonar Intensity Return Bait Ball RTS Real Time Sonar Window Low Sonar Intensity ReturnSonar Zoom View Chart View Big Digits View ViewsSonar View Sonar viewsBottom Presentation Understanding Sonar HistoryReal Time Sonar RTS Window Big Digits View Sonar Zoom ViewBig Digits View Chart View Chart View with Active CursorBird’s Eye View Bird’s Eye ViewViewing Cartography Combo ViewView Orientation Introduction to Navigation Waypoints, Routes and TracksSave, Edit, or Delete a Waypoint Waypoints, Routes and TracksNavigate to a Waypoint or Position Chart View with TargetAdd a Waypoint Target or Trolling Grid Save or Clear a Current Track Chart View with GridSave, Edit or Delete a Route POWER/LIGHT Key Edit, Delete or Hide Saved TracksKey Functions View KeyWAY Cursor Control Key Mark KeyGoto Key Zoom +/- KeyPowering Up the Unit Main Menu System Normal User ModeSonar Tab, Normal Mode Sonar Tab, Advanced Mode Menu SystemStart-Up Options Menu Normal OperationSimulator System StatusPosition Error GPS Diagnostic ViewSonar X-Press Menu Sonar Views OnlyTo adjust the Sensitivity To adjust the Upper RangeSensitivity Upper RangeBottom View Chart SpeedLower Range Navigation X-Press Menu Save Current TrackClear Current Track Save Current RouteCancel Navigation Skip Next WaypointRemove Target Remove GridTo turn Fish ID+ on or off Sonar Menu TabFish ID+ Advanced Fish SensitivityDepth Lines Surface Clutter Noise FilterMax Depth Water TypeNavigation Menu Tab TracksWaypoints Tracks Submenu contains the following menu choicesMap Borders Chart Detail LevelRoutes Lat/Lon Grid Spot SoundingsShaded Depth North ReferenceMap Datum Set Simulation PositionSet Map Offset Clear Map OffsetAlarms Menu Tab Depth AlarmFish ID Alarm Low Battery AlarmTemp Alarm Off Course AlarmArrival Alarm Drift AlarmAlarm Tone Setup Menu TabTo change the Alarm Tone setting Setup tab is selectedUser Mode Units DepthUnits Speed Units TempTriplog Reset Restore DefaultsSelect Readouts Advanced, Sonar View OnlyDepth Offset Temp OffsetSpeed Calibration Local Time ZoneTime Format Date FormatNmea Output SonarTroubleshooting FishFinder Doesn’t Power UpFishFinder Defaults to Simulator with a Transducer Attached Views Menu TabDisplay Problems Problem Possible CauseFinding the Cause of Noise IsolationHumminbird FishFinder Accessories SpecificationsContact Humminbird
Top Page Image Contents