Humminbird 595C manual Setup Menu Tab, To change the Alarm Tone setting, Setup tab is selected

Page 33

FF595_Man_531385-1_A_PrfE.qxd 12/9/2004 2:41 PM Page 64

Alarm Tone

Alarm Tone selects the pitch of the alarm sound. A brief tone will be produced as you adjust the Alarm Tone so that you can select the tone that you can hear best.

To change the Alarm Tone setting:

1.Highlight Alarm Tone on the Alarms main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Alarm Tone setting. (High, Medium, Low, Default = Medium)

Setup Menu Tab

From any view, press the MENU key twice to access the tabbed

Main Menu System, then press the RIGHT cursor key until the

Setup tab is selected.

NOTE: Menu choices will vary depending on system settings such as whether the unit is set for Advanced User mode and what accessories are attached to the unit.

NOTE:
Units - Temp	(International Models Only)
Units - Distance	(Only if Temp/Speed is Connected)
Units - Speed	(Only if Temp/Speed is Connected)
Language	(International Models Only)
Triplog Reset	(Only if Temp/Speed is Connected)
Select Views	(Advanced)
Select Readouts	(Advanced, Sonar View Only)
Depth Offset	(Advanced)
Temp Offset	(Advanced)
Speed Calibration	(Advanced, Only if Temp/Speed Connected)

Setup Menu

58

59

Image 33

Contents FishFinder 595c Operations Manual Thank You Table of ContentsAlarms Menu Tab Powering Up the Unit Menu System Start-Up Options MenuSetup Menu Tab Sonar X-Press Menu Sonar Views OnlyViews Menu Tab Troubleshooting How Sonar WorksSingle Beam Sonar Multi-Media Card MMC How GPS and Cartography WorkWhat’s On the Sonar Display KHz Fish SymbolHigh Sonar Intensity Return Bait Ball RTS Real Time Sonar Window Low Sonar Intensity ReturnViews Sonar Zoom View Chart View Big Digits ViewSonar View Sonar viewsUnderstanding Sonar History Real Time Sonar RTS WindowBottom Presentation Sonar Zoom View Big Digits ViewBig Digits View Chart View with Active Cursor Chart ViewBird’s Eye View Bird’s Eye ViewCombo View View OrientationViewing Cartography Waypoints, Routes and Tracks Introduction to NavigationSave, Edit, or Delete a Waypoint Waypoints, Routes and TracksChart View with Target Add a Waypoint Target or Trolling GridNavigate to a Waypoint or Position Chart View with Grid Save, Edit or Delete a RouteSave or Clear a Current Track Edit, Delete or Hide Saved Tracks POWER/LIGHT KeyKey Functions View KeyMark Key WAY Cursor Control KeyGoto Key Zoom +/- KeyMain Menu System Normal User Mode Powering Up the UnitSonar Tab, Normal Mode Sonar Tab, Advanced Mode Menu SystemNormal Operation Start-Up Options MenuSimulator System StatusGPS Diagnostic View Position ErrorSonar X-Press Menu Sonar Views OnlyTo adjust the Upper Range To adjust the SensitivitySensitivity Upper RangeChart Speed Lower RangeBottom View Save Current Track Navigation X-Press MenuClear Current Track Save Current RouteSkip Next Waypoint Cancel NavigationRemove Target Remove GridSonar Menu Tab Fish ID+To turn Fish ID+ on or off Fish Sensitivity Depth LinesAdvanced Noise Filter Surface ClutterMax Depth Water TypeTracks Navigation Menu TabWaypoints Tracks Submenu contains the following menu choicesChart Detail Level RoutesMap Borders Spot Soundings Lat/Lon GridShaded Depth North ReferenceSet Simulation Position Map DatumSet Map Offset Clear Map OffsetDepth Alarm Alarms Menu TabFish ID Alarm Low Battery AlarmOff Course Alarm Temp AlarmArrival Alarm Drift AlarmSetup Menu Tab Alarm ToneTo change the Alarm Tone setting Setup tab is selectedUnits Depth User ModeUnits Speed Units TempRestore Defaults Triplog ResetSelect Readouts Advanced, Sonar View OnlyTemp Offset Depth OffsetSpeed Calibration Local Time ZoneDate Format Time FormatNmea Output SonarFishFinder Doesn’t Power Up TroubleshootingFishFinder Defaults to Simulator with a Transducer Attached Views Menu TabProblem Possible Cause Display ProblemsFinding the Cause of Noise IsolationSpecifications Humminbird FishFinder AccessoriesContact Humminbird