Rear View/ Terminal Board
42 inch
B DA
VIDEO | AUDIO 1 | DVD1 / HD1 | AUDIO 2 | RGB2 / DVD2 / HD2 |
2 | R |
| R |
|
1 (IN/OUT) |
|
| R/Cr/Pr | G/Y | B/Cb/Pb | HD | VD |
3 | Y | Cb/Pb | Cr/Pr |
|
|
|
|
L (MONO) |
|
| L (MONO) |
|
|
|
|
RGB 1 | AUDIO 3 | RGB 3 | EXTERNAL CONTROL | REMOTE | |
| R |
|
|
|
|
(IN/OUT) |
| DV I ( Digital RGB ) |
| I N | OUT |
L(MONO)
C E F G H I J K
AAC IN
Connect the included power cord here.
BEXT SPEAKER L and R
Connect speakers (optional) here. Maintain the correct
polarity. Connect the 
(positive) speaker wire to the
EXT SPEAKER terminal and the 
(negative)
speaker wire to the 
EXT SPEAKER terminal on both LEFT and RIGHT channels.
Please refer to your speaker’s owner’s manual.
CVIDEO1, 2, 3 (BNC, RCA,
Connect VCR’s, DVD’s or Video Cameras, etc. here. VIDEO1 can be used for Input or Output.
DAUDIO1, AUDIO2, AUDIO3 These are audio input terminals.
The input is selectable. Set which video image corresponds to the audio input from the audio menu screen.
EDVD1 / HD1
Connect DVD’s, High Definition or Laser Discs, etc. here.
FRGB2/ DVD2/ HD2
RGB2: | You can connect an analog RGB signal |
| and the syncronization signal. |
DVD2/ HD2: You can connect DVDs, High Definition sources, Laser Discs, etc. here.
This input can be set for use with an RGB or component source.
GRGB1 (mini D-Sub 15pin)
Connect an analog RGB signal from a computer, etc. here. This input can be used for Input or Output.
HRGB3 (DVI 24pin)
Connect a digital signal (TMDS) from a source with a DVI output.
This input can be set for use with an RGB/PC3. | |
Downloaded From |
IEXTERNAL CONTROL
This terminal is used when operating and controlling the monitor externally with a control system (by RS- 232C).
JREMOTE IN (DC +5V)
Connect the remote cable* to the remote control’s remote jack to obtain wired remote control.
KREMOTE OUT (C-MOS DC +5V)
Connect the remote cable* to the REMOTE IN jack of the other display monitor to obtain wired remote control.
Connection Example: Connecting a TV tuner | |
PLASMA DISPLAY |
|
VIDEO |
|
IN |
|
| VIDEO |
| OUT |
REMOTE | TV Tuner |
| |
OUT |
|
| REMOTE |
| IN |
TV Tuner |
|
Remote Control |
|
Carrier fHz: 38kHz | |
* The 1/8 Stereo Mini cable must be purchased separately.
Information
•For Y/CB/Cr, connect to the DVD1 or DVD2 terminals.
•For SCART, this unit provides three ways to connect:
·SCART1: Connect R/G/B to the DVD2 terminals and composite sync. to the HD terminal.
·SCART2: Connect R/G/B to the DVD2 terminals and composite sync. to the VIDEO1 terminal.
·SCART3: Connect R/G/B + composite sync. to the RGB1 terminal.