NEC PX-42XM4G, PX-61XM4G, PX-50XM5G Wide Operations, When viewing videos or digital video discs

Page 14

WIDE Operations

Wide Screen Operation (manual)

With this function, you can select one of six screen sizes.

When viewing videos or digital video discs

1.Press the WIDE button on the remote control.

2.Within 3 seconds ...

Press the WIDE button again.

The screen size switches as follows:

→ NORMAL → FULL → STADIUM → ZOOM → 2.35:1 → 14:9

When a 720P or 1080I signal is input:

FULL ↔ 2.35:1

When displaying enhanced split screen:

NORMAL ↔ FULL

NORMAL size screen (4:3)

The normal size screen is displayed.

*The picture has the same size as video pictures with a 4 : 3 aspect ratio.

FULL size screen

The image is expanded in the horizontal direction.

*Images compressed in the horizontal direction (“squeezed images”) are expanded in the horizontal direction and displayed on the entire screen with correct linearity. (Normal images are expanded in the horizontal direction.)

STADIUM size screen

The picture is expanded in the horizontal and vertical directions at different ratios.

*Use this for watching normal video programs (4:3) with a wide screen.

ZOOM size screen

2.35:1 size screen

Original image Information is lost on both sides.

The squeezed film image is expanded to fulfill the entire screen at a ratio of 2.35:1. Black bands do not appear at the top and bottom but information is lost on the left and right margins.

•This feature is available when the input signal is video, component (480I, 480P, 576I, 576P, 720P, 1080I) or RGB

(525P or 625P signal from a scan converter).

*If black bands appear on the top and bottom in the full size screen, select the 2.35:1 size screen to fill the screen and avoid image retention.

14:9 size screen

The image is displayed at a 14:9 aspect ratio.

*This feature is available when the input signal is video, component (480I, 480P, 576I, 576P) or RGB (525P or 625P signal from a scan converter).

Note:

Do not allow 4:3 content to be displayed for extended periods of time without using gray bars. This can cause image retention.

The picture is expanded in the horizontal and vertical

direction, maintaining the original proportions.

Downloaded From TV-Manual.com ManualsEn-13* Use this for theater size (wide) movies, etc.

Image 14

Contents PlasmaSync Plasma Monitor User’s Manual Precautions Important InformationDisposing of your used product Contents Installation Ventilation Requirements for enclosure mountingCable Management RGB/DVD/HD signalCreating a video wall Using the wired remote control mode Using the remote controlBattery Installation and Replacement Handling the remote controlPart Names and Function Turns the monitor’s power on and offReceives the signals from the remote control Front ViewInch Connection Example Connecting a TV tunerRear View/ Terminal Board 51/61 inch Cb/PbRemote Control Basic Operations When viewing videos or digital video discs Wide Operations Supported resolution Wide Screen Operation with Computer SignalsWhen Picture Size is set to OFF Picture Size settingShowing a couple of pictures on the screen at the same time Operations in the Side-by-side modeSplit Screen Operations Adjusting the OSM controls Operations in the Picture-in-picture modeSelecting the input signals to be displayed Zooming in on a specific inputActual screen may be different from the ones in this manual Advanced menu modeMenu Operations Reset Menu Tree Restoring the factory default settings Video WallSetting the color temperature Picture Settings MenuAdjusting the picture Reducing noise in the pictureAdjusting the colors Adjusting the color to the desired levelMaking the Low Tone adjustments Changing the Gamma CurveSetting the allocation of the audio connectors Audio Settings MenuImage Adjust Settings Menu Adjusting the Position, Size, Fine Picture, Picture AdjSetting the BNC input connector type Option1 Settings MenuSetting the on-screen menu Setting the RGB1 connectorResetting to the default values Setting high definition images to the suitable screen sizeSetting the Input Skip POWER/STANDBY indicator Option2 Settings MenuSetting the power management for computer images Setting the picture to suit the movieOrbiter Function settings Orbiter settingsInverse Settings Setting the timeSoft Focus settings Setting the gray level for the sides of the screenSetting the screen size for S1/S2 video input Gray Level settingsSetting the signal and black level for DVI signal Option3 Settings MenuSetting the picture size for RGB input signals Using the timerTo reset the data Program Timer settingsTo reset the program Special characters in the Program Timer screenLoop Out setting Setting the power on modeEnabling/disabling remote control wireless transmission Remote ID settingID number setting Video Wall settingImage Adjust settings DISP. Mode settingsAuto ID settings On Delay settingsRepeat Timer PLE Link settingsRepeat Timer settings PLE LinkDisplaying still images in the sub screen Option4 Settings MenuDisplaying the entire image during Digital Zoom operations Switching the input source quickly Displaying the information as a textColor System Settings Menu Advanced OSM Settings MenuLanguage Settings Menu Source Information MenuExternal Control Pin AssignmentsTroubleshooting Symptom Checks RemedyComputer input signals supported by this system Table of Signals SupportedSupported resolution 42XM4 CVT standard compliant FullSupported resolution 50XM5/61XM4 True Full DVITrue Full Specifications 42XM450XM5 61XM4