SCREEN WIPER
When this is set to ON, a white vertical bar moves repeatedly from the left and of the screen to the right end at a constant speed.
Example: Setting “SCREEN WIPER” to “ON”
On “SCREEN WIPER” of “LONG LIFE” menu, select “ON”.
LONG LIFE
PLE |
| : | AUTO |
ORBITER |
| : | AUTO1 |
INVERSE |
| : | OFF |
SCREEN WIPER | : | ON | |
SOFT FOCUS | : | OFF | |
|
|
|
|
SEL. | ADJ. |
| EXIT RETURN |
Information
⬛SCREEN WIPER
ON: The white vertical bar appears.
You can set the time by pressing the MENU/ENTER button while “ON” is set.
OFF: Screen wiper mode does not function.
Setting the time for SCREEN WIPER
Set a time duration and the speed.
Example: Setting so that the SCREEN WIPER mode starts in 30 minutes and proceeds for one and a half hours.
On “SCREEN WIPER” of “LONG LIFE” menu, select “ON”, then press the MENU/ENTER button.
THE “SCREEN WIPER” screen appears. Adjust the times and speed.
SCREEN WIPER
WORKING TIME | : | 01H30M | |
WAITING TIME | : | 00H30M | |
SPEED |
| : | 3 |
|
|
|
|
SEL. | ADJ. |
| EXIT RETURN |
Information
⬛Setting the time
WORKING TIME: Set the time duration for “SCREEN WIPER”.
When the WORKING TIME is set to “ON” the mode will stay on.
WAITING TIME: Set the standby time until the “SCREEN WIPER” mode starts.
SPEED: Set the moving speed for the “SCREEN WIPER”. The speed decreases as the number increases.
*The “WAITING TIME” can not be set when the “WORKING TIME” is ON.
*THE “WORKING TIME” and “WAITING TIME” can be set for up to 12 hours and 45 minutes in units of 3 minutes.
⬛To select “ON” for the “WORKING TIME”...
Set the hours of the working time to 0H and the minutes to 0M. “ON” will be displayed.
SOFT FOCUS
Reduces edges and softens the image.
Example: Setting “SOFT FOCUS” to “2”
On “SOFT FOCUS” of “LONG LIFE” menu, select “2”.
LONG LIFE
PLE |
| : | AUTO |
ORBITER |
| : | AUTO1 |
INVERSE |
| : | OFF |
SCREEN WIPER | : | OFF | |
SOFT FOCUS | : | 2 | |
|
|
|
|
SEL. | ADJ. |
| EXIT RETURN |
Information
⬛SOFT FOCUS settings
OFF: Turns the SOFT FOCUS function off.
1, 2, 3, 4: Activates the SOFT FOCUS setting. The higher numbers create a softer image. “SHARPNESS” can not be adjusted in the “PICTURE” menu.
Setting the gray level for the sides of the screen
Use this procedure to set the gray level for the parts on the screen on which nothing is displayed when the screen is set to the 4:3 size.
Example: Setting “GRAY LEVEL” to “5”
On “GRAY LEVEL” of “OPTION2” menu, select “5”.
| OPTION 2 | 2 / 4 | |
PREVIOUS PAGE |
|
| |
PWR . MGT. |
| : | OFF |
CINEMA MODE | : | ON | |
LONG LIFE |
|
|
|
GRAY LEVEL | : | 5 | |
S1/S2 |
| : | OFF |
PICTURE SIZE | : | ON | |
DVI SET UP |
|
|
|
NEXT PAGE |
|
| |
SEL. | ADJ. |
| EXIT RETURN |
Information
⬛GRAY LEVEL settings
This adjusts the brightness of the black (the gray level) for the sides of the screen.
The standard is 0 (black). The level can be adjusted from 0 to 15. The factory setting is 3 (dark gray).
Setting the screen size for S1/S2 video input
If the
This feature is available only when an
Example: Setting the “S1/S2” to “AUTO”
On “S1/S2” of “OPTION2” menu, select “AUTO”.
| OPTION 2 | 2 / 4 | |
PREVIOUS PAGE |
|
| |
PWR . MGT. |
| : | OFF |
CINEMA MODE | : | ON | |
LONG LIFE |
|
|
|
GRAY LEVEL | : | 3 | |
S1/S2 |
| : | AUTO |
PICTURE SIZE | : | ON | |
DVI SET UP |
|
|
|
NEXT PAGE |
|
| |
SEL. | ADJ. |
| EXIT RETURN |
Downloaded From |
Information
⬛S1/S2 settings
AUTO: Adjusts the screen size automatically according to the S1/S2 video signal.
OFF: Turns the S1/S2 function off.