Option2 Settings Menu
Set “ADVANCED OSM” to “ON” in the MAIN MENU.
Setting the power management for computer images
This
Example: Turning the power management function on
On “PWR. MGT.” of “OPTION2” menu, select “ON”.
| OPTION 2 | 2 / 4 | |
PREVIOUS PAGE |
|
| |
PWR . MGT. |
| : | ON |
CINEMA MODE | : | ON | |
LONG LIFE |
|
|
|
GRAY LEVEL | : | 3 | |
S1/S2 |
| : | OFF |
PICTURE SIZE | : | ON | |
DVI SET UP |
|
|
|
NEXT PAGE |
|
| |
SEL. | ADJ. |
| EXIT RETURN |
Information
⬛Power management function
*The power management function automatically reduces the monitor’s power consumption if the computer’s keyboard or mouse is not operated for a certain amount of time. This function can be used when using the monitor with a computer.
*If the computer’s power is not turned on or if the computer and selector tuner are not properly connected, the system is set to the off state.
*For instructions on using the computer’s power management function, refer to the computer’s operating instructions.
⬛Power management settings
ON: In this mode the power management function is turned on.
OFF: In this mode the power management function is turned off.
⬛Power management function and POWER/ STANDBY indicator
The POWER/STANDBY indicator indicates the status of the power management function. See below for indicator status and description.
POWER/STANDBY indicator
Power | POWER/ | Power | Description | Turning the picture |
management | STANDBY | management |
| back on |
mode | indicator | operating status |
|
|
|
|
|
|
|
On | Green | Not activated. | Horizontal and vertical | Picture already on. |
|
|
| synchronizing signals |
|
|
|
| are present from the |
|
|
|
| computer. |
|
|
|
|
|
|
Off | Red | Activated. | Horizontal and/or | Operate the keyboard or |
|
|
| vertical synchronizing | mouse. The picture |
|
|
| signals are not sent | reappears. |
|
|
| from the computer. |
|
|
|
|
|
|
Setting the picture to suit the movie
The film image is automatically discriminated and projected in an image mode suited to the picture. [NTSC, PAL, PAL60, 480I (60Hz), 525I (60Hz), 576I (50Hz), 625I (50Hz), 1035I (60Hz), 1080I (60Hz) only]
Example: Setting the “CINEMA MODE” to “OFF”
On “CINEMA MODE” of “OPTION2” menu, select “OFF”.
| OPTION 2 | 2 / 4 | |
PREVIOUS PAGE |
|
| |
PWR . MGT. |
| : | OFF |
CINEMA MODE | : | OFF | |
LONG LIFE |
|
|
|
GRAY LEVEL | : | 3 | |
S1/S2 |
| : | OFF |
PICTURE SIZE | : | ON | |
DVI SET UP |
|
|
|
NEXT PAGE |
|
| |
SEL. | ADJ. |
| EXIT RETURN |
Information
⬛CINEMA MODE
ON: Automatic discrimination of the image and projection in cinema mode.
OFF: Cinema mode does not function.
Reducing image retention
The brightness of the screen, the position of the picture, positive/negative mode and screen wiper are adjusted to reduce image retention.
On “OPTION2” menu, select “LONG LIFE”, then press the MENU/ENTER button.
The “LONG LIFE” screen appears.
LONG LIFE
PLE |
| : | AUTO |
ORBITER |
| : | AUTO1 |
INVERSE |
| : | OFF |
SCREEN WIPER | : | OFF | |
SOFT FOCUS | : | OFF | |
|
|
|
|
SEL. | ADJ. |
| EXIT RETURN |
PLE (Peak Luminance Enhancement)
Use this to activate the brightness limiter.
Example: Setting “PLE” to “LOCK1”
On “PLE” of “LONG LIFE” menu, select “LOCK1”.
LONG LIFE
PLE |
| : | LOCK1 |
ORBITER |
| : | AUTO1 |
INVERSE |
| : | OFF |
SCREEN WIPER | : | OFF | |
SOFT FOCUS | : | OFF | |
SEL. | ADJ. |
| EXIT RETURN |
Information
⬛PLE settings
AUTO: The brightness of the screen is adjusted automatically to suit the picture quality.
LOCK1, 2, 3: Sets maximum brightness.
The brightness level decreases in the order of LOCK 1, 2, 3. LOCK 3 provides minimum brightness.
Downloaded From |